Noob DPDT question

[Wantomeeto]

I have a guitar effects pedal and want to tie in to 4 small pushbuttons
(each has 4 connections to the CB) and actuate the contacts from a remote
location. I am baffled as to why they would need 4 connections for a simple
pushbutton. Can I simply short 2 and 2? I really want to hack one of
those cheapy playstation controllers for this project.

Any ideas?

 

[tempus fugit]

Are you sure there are 4 different connections? I'm guessing that controller
is using tactile switches - they often have 4 legs to mount to the circuit
board. In this case, there are only 2 connections (minimum requirement for a
switch), or more accurately, 2 pairs of connections.





"Wantomeeto" <Watn@ton.com> wrote in message
news:MetEb.9521$031.5293@fe3.columbus.rr.com...

I have a guitar effects pedal and want to tie in to 4 small pushbuttons
(each has 4 connections to the CB) and actuate the contacts from a remote
location. I am baffled as to why they would need 4 connections for a
simple
pushbutton. Can I simply short 2 and 2? I really want to hack one of
those cheapy playstation controllers for this project.

Any ideas?

 

[Wantomeeto]

Interesting point. I will check the circuit board to verify this. It makes
sense though - thanks~!



"tempus fugit" <toccata.no.spam@ciaccess.com> wrote in message
newsWPEb.65113$7W1.60433@nntp-post.primus.ca...

Are you sure there are 4 different connections? I'm guessing that
controller
is using tactile switches - they often have 4 legs to mount to the circuit
board. In this case, there are only 2 connections (minimum requirement for
a
switch), or more accurately, 2 pairs of connections.





"Wantomeeto" <Watn@ton.com> wrote in message
news:MetEb.9521$031.5293@fe3.columbus.rr.com...
I have a guitar effects pedal and want to tie in to 4 small pushbuttons
(each has 4 connections to the CB) and actuate the contacts from a
remote
location. I am baffled as to why they would need 4 connections for a
simple
pushbutton. Can I simply short 2 and 2? I really want to hack one of
those cheapy playstation controllers for this project.

Any ideas?