Non Working DM-1800 Digital MultiMeter?

K

KenO

Guest
Recently removed 2 Digital MultiMeters from storage. When turned on after installing new 9V batteries both did not work.

Was guessing that the electrolytic capacitors need reforming so Googled and found "Reforming Electrolytic Capacitors"
http://www.vcomp.co.uk/tech_tips/reform_caps.htm

Followed the instructions and one started working.

The other still shows the same 989 display (with changes of decimal point depending on the selector position.)

Have not yet taken it apart.

Can provide photos if someone wants.

It is same as "Brand New Digital Multimeter DM-1800" http://www.jlaforums.com/viewtopic.php?t=300532580

Appreciate any suggestions!!!

Thanks

Ken
 
Reforming caps is a fool's task. Replace them. Full stop.

Peter Wieck
Melrose Park, PA
 
On 03/05/2016 18:07, KenO wrote:
Recently removed 2 Digital MultiMeters from storage. When turned on after installing new 9V batteries both did not work.

Was guessing that the electrolytic capacitors need reforming so Googled and found "Reforming Electrolytic Capacitors"
http://www.vcomp.co.uk/tech_tips/reform_caps.htm

Followed the instructions and one started working.

The other still shows the same 989 display (with changes of decimal point depending on the selector position.)

Have not yet taken it apart.

Can provide photos if someone wants.

It is same as "Brand New Digital Multimeter DM-1800" http://www.jlaforums.com/viewtopic.php?t=300532580

Appreciate any suggestions!!!

Thanks

Ken

Do they have rotary switch, function select ?
 

Welcome to EDABoard.com

Sponsor

Back
Top