No properties when instance queried

[Shaun Johnson]

When I query an instance in Composer the Object Properties form has
nothing in it. However, AnalogArtist will netlist the schematic fine,
with all default values as they should be.

Thanks for any help, Shaun

 

[harry]

Hi shaun,
when u open the object properties form,there are few buttons over
there ,namely system ,user ,CDF.Try clicking on CDF properties u will
find,
your properties over there.
Also make sure that your transistor or instance is selected ,then
click on object and properties.
Other thing could be that on one of cyclic field ,there could be "all
or allselected" selected ,make it only current and u should be able to
see your properties.
I am assuming that u are using cadence for ur designs.

have fun
harry

sbjsale@hotmail.com (Shaun Johnson) wrote in message news:<5122ff99.0408101004.259eeda0@posting.google.com>...

When I query an instance in Composer the Object Properties form has
nothing in it. However, AnalogArtist will netlist the schematic fine,
with all default values as they should be.

Thanks for any help, Shaun

 

[Andrew Beckett]

Also, there's a problem on Linux where the form ends up rather shrunk sometimes,
and you need to stretch it to see the contents...

Andrew.

On 13 Aug 2004 02:19:03 -0700, hsingh@ece.pdx.edu (harry) wrote:

Hi shaun,
when u open the object properties form,there are few buttons over
there ,namely system ,user ,CDF.Try clicking on CDF properties u will
find,
your properties over there.
Also make sure that your transistor or instance is selected ,then
click on object and properties.
Other thing could be that on one of cyclic field ,there could be "all
or allselected" selected ,make it only current and u should be able to
see your properties.
I am assuming that u are using cadence for ur designs.

have fun
harry

sbjsale@hotmail.com (Shaun Johnson) wrote in message news:<5122ff99.0408101004.259eeda0@posting.google.com>...
When I query an instance in Composer the Object Properties form has
nothing in it. However, AnalogArtist will netlist the schematic fine,
with all default values as they should be.

Thanks for any help, Shaun

--
Andrew Beckett
Senior Technical Leader
Custom IC Solutions
Cadence Design Systems Ltd