No power to my monitor

H

Hashim Alam

Guest
I have a Panasonic PanaSyncE70 (17") monitor and a while back it was
on and all of a sudden it turned off with nothing out of the ordinary.
There is no power going to the monitor. I checked the fuse and its
fine. I have no clue what's wrong with it. Anyone know whats wrong
with it? Thanx in advance.
 
"Hashim Alam" <hashimalam@hotmail.com> wrote in message
news:68439a0.0402111705.206738c4@posting.google.com...
I have a Panasonic PanaSyncE70 (17") monitor and a while back it was
on and all of a sudden it turned off with nothing out of the ordinary.
There is no power going to the monitor. I checked the fuse and its
fine. I have no clue what's wrong with it. Anyone know whats wrong
with it? Thanx in advance.
Sounds like it's broken, nobody can tell you what's wrong with it without a
crystal ball.
 
Check to see that it is properly connected to the AC mains, and that the
power cable is good.

It is possible that there was a scan failure, or a power supply failure.
This is not something you will be able to service yourself, unless you are
trained and equipped to do monitor service.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Hashim Alam" <hashimalam@hotmail.com> wrote in message
news:68439a0.0402111705.206738c4@posting.google.com...
I have a Panasonic PanaSyncE70 (17") monitor and a while back it was
on and all of a sudden it turned off with nothing out of the ordinary.
There is no power going to the monitor. I checked the fuse and its
fine. I have no clue what's wrong with it. Anyone know whats wrong
with it? Thanx in advance.
 
Yes... You said ``their is no power going to the monitor ``

Apply power and it should work .
 

Welcome to EDABoard.com

Sponsor

Back
Top