NIOS 2 + linux + DE2 Board

[magic]

Hi

I've got problem to load linux image to my 2c35 FPGA on DE2 board. The
example sof with NIOS2 come from examples(/opt/altera9.1sp1/nios2eds/
examples/verilog/niosII_cycloneII_2c35/full_featured/). All
instructions I get from this site:
http://www.nioswiki.com/OperatingSystems/UClinux/QuartusforLinux

[NiosII EDS]$ jtagconfig
1) USB-Blaster [USB 5-1.2]
020B40DD EP2C35
[NiosII EDS]$ nios2-configure-sof
/opt/altera9.1sp1/nios2eds/examples/verilog/niosII_cycloneII_2c35/
full_featured/
NiosII_cycloneII_2c35_full_featured.sof
Info:
*******************************************************************
Info: Running Quartus II Programmer
Info:
Command: quartus_pgm --no_banner --mode=jtag -o
p;/opt/altera8.0/nios2eds/examples/verilog/niosII_cycloneII_2c35/
full_featured/
NiosII_cycloneII_2c35_full_featured.sof
Info: Using programming cable "USB-Blaster [USB 5-1.2]"
Info: Started Programmer operation at Fri Dec 8 11:35:01 2006
Info: Configuring device index 1
Info: Device 1 contains JTAG ID code 0x020B40DD
Info: Configuration succeeded -- 1 device(s) configured
Info: Successfully performed operation(s)
Info: Ended Programmer operation at Fri Dec 8 11:35:04 2006
Info: Quartus II Programmer was successful. 0 errors, 0 warnings
Info: Processing ended: Fri Dec 8 11:35:04 2006
Info: Elapsed time: 00:00:22
[NiosII EDS$ nios2-download -g ~/uClinux-dist/images/zImage
Using cable "USB-Blaster [USB 5-1.2]", device 1, instance 0x00
Pausing target processor: OK
Initializing CPU cache (if present)
OK
Downloaded 1016KB in 16.2s (62.7KB/s)
Verified OK
Starting processor at address 0x04500000
[NiosII EDS$ nios2-terminal
nios2-terminal: connected to hardware target using JTAG UART on cable
nios2-terminal: "USB-Blaster [USB 5-1.2]", device 1, instance 0
nios2-terminal: (Use the IDE stop button or Ctrl-C to terminate)
Uncompressing Linux... Ok, booting the kernel.
Linux version 2.6.Uncompressing Linux... Ok, booting the kernel.
Linux version 2.6.17-uc1 (hippo@darkstar) (gcc version 3.4.6) #46
PREEMPT Thu Dec 7 15:22:06 CST 2006

Unfortunately when I download image to NIOS I receive:

Using cable "USB-Blaster [USB 1-1.3.1]", device 1, instance 0x00
Pausing target processor: not responding.
Resetting and trying again: FAILED
Leaving target processor paused

When I try another sof file example from site:
http://www.nioswiki.com/OperatingSystems/UClinux/TryOutuClinux

 

[magic]

When I try another sof file example from site:
http://www.nioswiki.com/OperatingSystems/UClinux/TryOutuClinux
(part for For DE2 2C35 dev board)
everything is running. Linux is booting and I got this when I trying
donwload image:
Using cable "USB-Blaster [USB 1-1.3.1]", device 1, instance 0x00
Pausing target processor: OK
Initializing CPU cache (if present)
OK
Downloaded 1208KB in 6.6s (183.0KB/s)
Verified OK.

Why example from altera doesn't work?