New Cadsoft Eagle & Electronics Forum

B

Barkster

Guest
I just wanted to tell everyone about my forum I opened dedicated to
Cadsoft Eagle Layout Editor and Electronics. Many people are not
familiar with Cadsoft's use of usenet for their forum/support so I
decided to open up a forum. Hope to see you there

www.cadsofteagle.com

Thanks
 
"Barkster" <bdog4@hotmail.com> wrote in message
news:d1498f23-3b86-495d-9360-ca9b003e7672@f37g2000vbf.googlegroups.com...
I just wanted to tell everyone about my forum I opened dedicated to
Cadsoft Eagle Layout Editor and Electronics.
Wouldn't it be smarter to have your forum at least linked to the Usenet group?
 
Joel Koltner wrote:
"Barkster" <bdog4@hotmail.com> wrote in message
news:d1498f23-3b86-495d-9360-ca9b003e7672@f37g2000vbf.googlegroups.com...
I just wanted to tell everyone about my forum I opened dedicated to
Cadsoft Eagle Layout Editor and Electronics.

Wouldn't it be smarter to have your forum at least linked to the Usenet group?
It's already done:

http://www.eaglecentral.ca/forums/

Currently you can only read and not (yet) post via it but I assume
that'll be fixed. So why re-invent the wheel?

--
Regards, Joerg

http://www.analogconsultants.com/

"gmail" domain blocked because of excessive spam.
Use another domain or send PM.
 
In sci.electronics.equipment Joerg <notthisjoergsch@removethispacbell.net> wrote:
Joel Koltner wrote:
"Barkster" <bdog4@hotmail.com> wrote in message
news:d1498f23-3b86-495d-9360-ca9b003e7672@f37g2000vbf.googlegroups.com...
I just wanted to tell everyone about my forum I opened dedicated to
Cadsoft Eagle Layout Editor and Electronics.

Wouldn't it be smarter to have your forum at least linked to the Usenet group?


It's already done:

http://www.eaglecentral.ca/forums/

Currently you can only read and not (yet) post via it but I assume
that'll be fixed. So why re-invent the wheel?
Why another Forum? What's wrong with the CADSOFT hosted groups?
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de

Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
 
Uwe Bonnes wrote:
In sci.electronics.equipment Joerg <notthisjoergsch@removethispacbell.net> wrote:
Joel Koltner wrote:
"Barkster" <bdog4@hotmail.com> wrote in message
news:d1498f23-3b86-495d-9360-ca9b003e7672@f37g2000vbf.googlegroups.com...
I just wanted to tell everyone about my forum I opened dedicated to
Cadsoft Eagle Layout Editor and Electronics.
Wouldn't it be smarter to have your forum at least linked to the Usenet group?


It's already done:

http://www.eaglecentral.ca/forums/

Currently you can only read and not (yet) post via it but I assume
that'll be fixed. So why re-invent the wheel?

Why another Forum? What's wrong with the CADSOFT hosted groups?

They are the best support forums since sliced bread. But we have to be
aware of the fact that younger people often do not know how to deal with
a newsreader. Heck, many don't even know what newsgroups are. So I think
that this mirror at Stratford Digital is quite nice, it allow people to
access from the web. This could even be useful for you and me some day.
Imagine sitting at a client's PC or a hotel computer. They sure won't
let you subscribe to newsgroups from there.

An added benefit of Stratford's mirror is that it lets you search all
groups, all the way back to the Neanderthal man. Can't do that with a
newsreader.

--
Regards, Joerg

http://www.analogconsultants.com/

"gmail" domain blocked because of excessive spam.
Use another domain or send PM.
 

Welcome to EDABoard.com

Sponsor

Back
Top