need relay for project

[gothika]

I need a relay with the following characteristics.
High side need to be 110~120 ac non latching.(springs back when
current is off.)
The low side will be working on/off on circuit board.
Relay closed will actuate one side of the low switch. Relay off
working second side of low switch.
Can anyone point me in the right direction or give me the parts # for
one with these specs.
It's been awhile since I've done any work with relays but I seem to
remember Potter Brumfield had relays like this.
Thanks in advance for any info to what is I'm sure a simple question
to most here.

 

[Art]

Specifications vary with the amount of current you actually want to control.
Many electronic devices use relays to switch their main operating potentials
off and on. Under 5 amp continous draw you may be able to ues one of those
items, above that current requirement you may want to go to an industrial
grade relay. MCM Electronics may be a source you may be interested in.
"gothika" <Vampyres@nettaxi.com> wrote in message
news:90s330dois5hqshkhvfpg441ba5m082eks@4ax.com...

I need a relay with the following characteristics.
High side need to be 110~120 ac non latching.(springs back when
current is off.)
The low side will be working on/off on circuit board.
Relay closed will actuate one side of the low switch. Relay off
working second side of low switch.
Can anyone point me in the right direction or give me the parts # for
one with these specs.
It's been awhile since I've done any work with relays but I seem to
remember Potter Brumfield had relays like this.
Thanks in advance for any info to what is I'm sure a simple question
to most here.

 

[WbSearch]

I have had success at Radio Shack in the past. Or try ElectroSwitch or
MagnaCraft.