Need part - LED strip

M

Mike Stupak

Guest
Does anybody know where I can get a part like the following off the self?

A single row of LEDs (preferably about 8 LEDs). LEDs must be individually
switchable. Strip should be about 6 inches long (LED spacing .75 inches).
Size is not too critical. Anything 3 inches to 8 inches will work just
fine. Preferably the leads will extend to one end of the strip. I don't
care about LED color. I would prefer brighter LEDs but just about anything
will do.

Thanks for any help you can provide.

-mike
 
"Mike Stupak" <mstupak@comcast.net> wrote in message
news:pMCdnZB1aOy7cevdRVn-tA@comcast.com...
Does anybody know where I can get a part like the following off the self?

A single row of LEDs (preferably about 8 LEDs). LEDs must be individually
switchable. Strip should be about 6 inches long (LED spacing .75 inches).
Size is not too critical. Anything 3 inches to 8 inches will work just
fine. Preferably the leads will extend to one end of the strip. I don't
care about LED color. I would prefer brighter LEDs but just about anything
will do.

Thanks for any help you can provide.

-mike
Hi Mike,

Osram makes LED strips, with similar requirements that you are asking, however, they
cannot be switched individually, only as a strip.

http://www.osram-os.com/products/lampmoduls/ma_line7.html

They are very bright, can be cut into short lengths, they also come multi colour which mix
to white.

Hope that gets you rolling in the right direction.


--
Myron Samila
Toronto, ON Canada
Samila Racing
http://204.101.251.229/myronx19
 
"Myron Samila" <myronx19@no.spam.sympatico.ca> wrote in message
news:AjCdc.14287$BF2.1218698@news20.bellglobal.com...
"Mike Stupak" <mstupak@comcast.net> wrote in message
news:pMCdnZB1aOy7cevdRVn-tA@comcast.com...
Does anybody know where I can get a part like the following off the self?

A single row of LEDs (preferably about 8 LEDs). LEDs must be individually
switchable. Strip should be about 6 inches long (LED spacing .75 inches).
Size is not too critical. Anything 3 inches to 8 inches will work just
fine. Preferably the leads will extend to one end of the strip. I don't
care about LED color. I would prefer brighter LEDs but just about anything
will do.

Thanks for any help you can provide.

-mike



Hi Mike,

Osram makes LED strips, with similar requirements that you are asking, however, they
cannot be switched individually, only as a strip.

http://www.osram-os.com/products/lampmoduls/ma_line7.html

They are very bright, can be cut into short lengths, they also come multi colour which
mix
to white.

Hope that gets you rolling in the right direction.


--
Myron Samila
Toronto, ON Canada
Samila Racing
http://204.101.251.229/myronx19

Although, you may be able to modify this one to work for you:


http://www.osram-os.com/products/lampmoduls/ma_line1.html

 
Mike Stupak wrote:
Does anybody know where I can get a part like the following off the self?

A single row of LEDs (preferably about 8 LEDs). LEDs must be individually
switchable. Strip should be about 6 inches long (LED spacing .75 inches).
Size is not too critical. Anything 3 inches to 8 inches will work just
fine. Preferably the leads will extend to one end of the strip. I don't
care about LED color. I would prefer brighter LEDs but just about anything
will do.
http://makeashorterlink.com/?X13A32BF7
 

Welcome to EDABoard.com

Sponsor

Back
Top