Need Operating and Service Manual for HP Power Supply 6216A

[hr(bob) hofmann@att.net]

I have an old Operating and Service Manual for a HP 6216A bench power
supply. But the photos and circuit board compnent layout are VERY
poor quality. Hoping someone here has a decent set of photos and
board layouts.

 

On Mon, 2 Jul 2012 12:27:40 -0700 (PDT), "hr(bob) hofmann@att.net"
<hrhofmann@att.net> wrote:

I have an old Operating and Service Manual for a HP 6216A bench power
supply. But the photos and circuit board compnent layout are VERY
poor quality. Hoping someone here has a decent set of photos and
board layouts.

Have you checked this archive?

http://bama.edebris.com/manuals/hp/

 

[Jeff Liebermann]

On Mon, 2 Jul 2012 12:27:40 -0700 (PDT), "hr(bob) hofmann@att.net"
<hrhofmann@att.net> wrote:

I have an old Operating and Service Manual for a HP 6216A bench power
supply. But the photos and circuit board compnent layout are VERY
poor quality. Hoping someone here has a decent set of photos and
board layouts.

It's amazing what you can find with Google.

Yeah, I see the problem:
<http://cp.literature.agilent.com/litweb/pdf/06216-90001.pdf>

This one looks better, but only slightly:
<http://128.238.9.201/~kurt/manuals/manuals/HP%20Agilent/HP%206216A%20Operation%20&%20Service.pdf>
<http://128.238.9.201/~kurt/manuals/manuals/HP%20Agilent/HP%206214C,%206214C,%206216C,%206216C,%206218C%20Operation.pdf>
<http://128.238.9.201/~kurt/manuals/manuals/HP%20Agilent/>

Judging by the photo of the unit and larger file size, this looks
promising:
<http://www.parts-recycling.com/Metal-Working-Machine-/Hydrolic-Press-/Hp-6216A-dc-power-supply-operating-service-manual.htm>

Or, just buy an original printed manual:
<http://www.ebay.com/itm/7602620668>

--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
# http://802.11junk.com jeffl@cruzio.com
# http://www.LearnByDestroying.com AE6KS

 

[Jeff Liebermann]

On Mon, 2 Jul 2012 20:23:11 -0700 (PDT), "hr(bob) hofmann@att.net"
<hrhofmann@att.net> wrote:

$26.99 for a manual for a $40 supply isn't worth it.

Actually, that's fairly typical for an original HP manual. Would $10
for a scan on CD be better?
<http://www.ebay.com/itm/390063677125>

My unit has a thick-film resistor chip on it, but none of the
schematics show or reference a CTS thick-fim resistor module..

I noticed that. Do you have the reference designator? I went down
the list of resitors and didn't find anything close. The schematic is
clear enough that I could probably guess the values. I've made
resistor arrays out of discrete resistors when desperate.

--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
# http://802.11junk.com jeffl@cruzio.com
# http://www.LearnByDestroying.com AE6KS

 

[hr(bob) hofmann@att.net]

On Jul 2, 6:20 pm, Jeff Liebermann <je...@cruzio.com> wrote:

On Mon, 2 Jul 2012 12:27:40 -0700 (PDT), "hr(bob) hofm...@att.net"

hrhofm...@att.net> wrote:
I have an old Operating and Service Manual for a HP 6216A bench power
supply.  But the photos and circuit board compnent layout are VERY
poor quality.  Hoping someone here has a decent set of photos and
board layouts.

It's amazing what you can find with Google.

Yeah, I see the problem:
http://cp.literature.agilent.com/litweb/pdf/06216-90001.pdf

This one looks better, but only slightly:
http://128.238.9.201/~kurt/manuals/manuals/HP%20Agilent/HP%206216A%20...
http://128.238.9.201/~kurt/manuals/manuals/HP%20Agilent/HP%206214C,%2...
http://128.238.9.201/~kurt/manuals/manuals/HP%20Agilent/

Judging by the photo of the unit and larger file size, this looks
promising:
http://www.parts-recycling.com/Metal-Working-Machine-/Hydrolic-Press-...

Or, just buy an original printed manual:
http://www.ebay.com/itm/7602620668

--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
#831-336-2558begin_of_the_skype_highlighting FREE 831-336-2558
#http://802.11junk.com              je...@cruzio.com
#http://www.LearnByDestroying.com              AE6KS

$26.99 for a manual for a $40 supply isn't worth it. The other links
are poor quality images and look to be where my current manual came
from. My unit has a thick-film resistor chip on it, but none of the
schematics show or reference a CTS thick-fim resistor module.. The
last link took me to a Digikey page which did not make any sense.
Thanks for taking the effort

 

[JW]

On Mon, 02 Jul 2012 21:00:36 -0700 Jeff Liebermann <jeffl@cruzio.com>
wrote in Message id: <75r4v7hbvjbkqr1fvc357eha5ov9m0gqlv@4ax.com>:

On Mon, 2 Jul 2012 20:23:11 -0700 (PDT), "hr(bob) hofmann@att.net"
hrhofmann@att.net> wrote:

$26.99 for a manual for a $40 supply isn't worth it.

Actually, that's fairly typical for an original HP manual. Would $10
for a scan on CD be better?
http://www.ebay.com/itm/390063677125

Save the shipping and get it now direct from the source.
http://artekmed.startlogic.com/page3.html

Dave's a great guy, and his prices are very reasonable. I've done business
with him many times.

 

[hr(bob) hofmann@att.net]

On Jul 3, 5:42 am, JW <n...@dev.null> wrote:

On Mon, 02 Jul 2012 21:00:36 -0700 Jeff Liebermann <je...@cruzio.com
wrote in Message id: <75r4v7hbvjbkqr1fvc357eha5ov9m0g...@4ax.com>:

On Mon, 2 Jul 2012 20:23:11 -0700 (PDT), "hr(bob) hofm...@att.net"
hrhofm...@att.net> wrote:

$26.99 for a manual for a $40 supply isn't worth it.

Actually, that's fairly typical for an original HP manual.  Would $10
for a scan on CD be better?
http://www.ebay.com/itm/390063677125

Save the shipping and get it now direct from the source.http://artekmed.startlogic.com/page3.html

Dave's a great guy, and his prices are very reasonable. I've done business
with him many times.

I just e-mailed Dave, and he e-mailed me back in a short time and was
able to tell me in 3 sentences what I was reading incorrectly from the
schematic that I already have. I have him bookmarked.

Thanks for the reference.