Need Help w/Littlefuse Ratings, Please

M

Marvin Moss

Guest
I need some 3AG Slo-Blo fuses rated at 8 amperes.
I have some but they say 313 3AG 8A 32V on the end cap.
I need some that will function at 120VAC. Will these work OK at 120VAC or
is there the possibility they will arc internally and not open cleanly?
What do I need that will work at 120VAC?

TIA,

Marvin
 
BTW The Littelfuse datasheet says 8A is 250V and 10A is 32V. I have asked
Littelfuse about this discrepancy between the fuse and the datasheet.


"Marvin Moss" <mmoss@mindspring.com> wrote in message
news:HZt4b.12051$Om1.9051@newsread2.news.atl.earthlink.net...
I need some 3AG Slo-Blo fuses rated at 8 amperes.
I have some but they say 313 3AG 8A 32V on the end cap.
I need some that will function at 120VAC. Will these work OK at 120VAC or
is there the possibility they will arc internally and not open cleanly?
What do I need that will work at 120VAC?

TIA,

Marvin
Click to expand...
 
The voltage rating on the fuse is the highest voltage that the fuse can handle
without shattering the glass or shorting internally.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top