Need Help plz

M

Matas

Guest
Ok, I need to made one program and I hope that someone will know it :S

I need to build a program that will do this thing. Its like a coffee
machine. When I input money in it, program must sum it and send it to 8
segment display (whole program is building on a Spartan 3). Coins are
these values: 5, 0.50, 2, 1. After that we choose our drink and pressed
it, program must reset value to 0.

Any help will be great, ty
 
On Tue, 27 Jan 2009 18:16:09 +0100, Matas wrote:

Ok, I need to made one program and I hope that someone will know it :S

I need to build a program that will do this thing. Its like a coffee
machine. When I input money in it, program must sum it and send it to 8
segment display (whole program is building on a Spartan 3). Coins are
these values: 5, 0.50, 2, 1. After that we choose our drink and pressed
it, program must reset value to 0.
Click to expand...
Take great care to choose the right version of Spartan-3.
It must have some inputs conforming to the CMOS
standard (Cash Machine Open Slots). Then you need to
make sure that there are some LVDS outputs (that's
Latte Vending Dispense System). And finally it's better
if you can find one with some SERDES (Sarcasm and Extreme
Rudeness Detection EngineS) because you'll need a lot
of those to deal with the replies you will likely get
to your post.

Oh, and send my regards to your prof. He's obviously
one of the old school. Not many of those left around now.
--
Jonathan Bromley, Consultant

DOULOS - Developing Design Know-how
VHDL * Verilog * SystemC * e * Perl * Tcl/Tk * Project Services

Doulos Ltd., 22 Market Place, Ringwood, BH24 1AW, UK
jonathan.bromley@MYCOMPANY.com
http://www.MYCOMPANY.com

The contents of this message may contain personal views which
are not the views of Doulos Ltd., unless specifically stated.
 
roden@rochester.rr.com wrote:
Any help will be great, ty

Try some coffee, it might help you stay awake in class.

If you dont know the code, dont write anything down ... konju
Click to expand...
 
Matas wrote:

Any help will be great, ty
Click to expand...
Then this will be great:
http://letmegooglethatforyou.com/?q=vhdl+vending+machine+lulu
 
Matas wrote:

If you dont know the code, dont write anything down ... konju
Click to expand...
If you don't know anything about the problem, and couldn't be bothered
finding out yourself, then don't post any questions!

And BTW, there's plenty of people on this group who do "know the code" as
you so eloquently put it, but I'm guessing none of them are going to help
out such a lazy, rude person like yourself.

Good luck with that!

--
Mark McDougall, Engineer
Virtual Logic Pty Ltd, <http://www.vl.com.au>
21-25 King St, Rockdale, 2216
Ph: +612-9599-3255 Fax: +612-9599-3266
 
Mark McDougall wrote:
Matas wrote:

If you dont know the code, dont write anything down ... konju

If you don't know anything about the problem, and couldn't be bothered
finding out yourself, then don't post any questions!

And BTW, there's plenty of people on this group who do "know the code" as
you so eloquently put it, but I'm guessing none of them are going to help
out such a lazy, rude person like yourself.

Good luck with that!

And you are defending when someone doesnt want to help you, instead of
Click to expand...
that he wrote some stupid answer?

Off course i tried to find it on the google and other pages, but I didnt
managed to find out solution for my problem. I found one code, but it
doesnt have that kind of system like extracting money on segment display ...

My knowledge about VHDL is very low, and its not because i slept over
course, its just how prof. works in mine country, and I didnt ever
fooling around with VHDL by myself
 
Mike Treseler wrote:
Matas wrote:

Any help will be great, ty

Then this will be great:
http://letmegooglethatforyou.com/?q=vhdl+vending+machine+lulu
Click to expand...
You just confirmed what roden wrote ...
 
Matas a écrit :
Mike Treseler wrote:
Matas wrote:

Any help will be great, ty

Then this will be great:
http://letmegooglethatforyou.com/?q=vhdl+vending+machine+lulu

You just confirmed what roden wrote ...
Click to expand...
All right, let's put this kindly.
No company is going to develop any hardware like that for a vending
machine. It's much more easily done with a smal microcontroller.
So your question is nothing but a work assignment some teacher gave you.
And you are asking us to do it for you.
You won't get any more useful answer than mine.

Nicolas
 
Matas wrote:
Ok, I need to made one program and I hope that someone will know it :S

I need to build a program that will do this thing. Its like a coffee
machine. When I input money in it, program must sum it and send it to
8 segment display (whole program is building on a Spartan 3). Coins
are these values: 5, 0.50, 2, 1. After that we choose our drink and
pressed it, program must reset value to 0.

Any help will be great, ty
Click to expand...
Matas,

You should try a course at this place.

http://www.etfos.hr/

I've emailed the professor your problem and to tell him you will be
applying.

Good luck, Syms.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top