NEC vcr VNG-29 - slow to FF/Rew.

  • Thread starter Russell Griffiths
  • Start date
R

Russell Griffiths

Guest
NEC vcr model VNG-29.

After repairing the fault in the p/s (see below),
I found the vcr is painfully slow to FF and rewind.
I think the motor is running slow.

Can anyone assist please?


***************************************************
VCR may appear dead with no display when cold.

After warming, with a tape playing, the sound may be
from the tape, but the picture is from the tuner.

Caps in p/s
CP19 (1000uF 10v)
cp25 (100uF 10v)
cp21 (47uF 50v)

Russell Griffiths
 
Check idler. Plastic bends slightly with time and causes similar problems.

If motor runs slow, it would appear in PLAY mode as well.

Rudolf

"Russell Griffiths" <rg26ce1991@hotmail.com> wrote in message
news:13cdb672.0310051849.66522070@posting.google.com...
NEC vcr model VNG-29.

After repairing the fault in the p/s (see below),
I found the vcr is painfully slow to FF and rewind.
I think the motor is running slow.

Can anyone assist please?


***************************************************
VCR may appear dead with no display when cold.

After warming, with a tape playing, the sound may be
from the tape, but the picture is from the tuner.

Caps in p/s
CP19 (1000uF 10v)
cp25 (100uF 10v)
cp21 (47uF 50v)

Russell Griffiths
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top