NEC Multisync 95

[Daniel L. Belton]

I have a NEC Multisybc 95, Model # MS95, chassis # N9902

The problem I am having is that the V. Sync is out on just the top 1/4 of
the screen. On the rest of the screen it is fine.

Any suggestions as to what is causing this problem?

Thanks,
Daniel Belton

 

[Jerry G.]

In these monitors, most of the time, it is bad caps in the vertical output
section. The use of an ESR meter is a very easy way to locate the bad ones.
Replace all the caps that read too high in ESR in relation to their value
type.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Daniel L. Belton" <abuse@spam.gov> wrote in message
news:5HJob.29107$oC5.13777@clmboh1-nws5.columbus.rr.com...
I have a NEC Multisybc 95, Model # MS95, chassis # N9902

The problem I am having is that the V. Sync is out on just the top 1/4 of
the screen. On the rest of the screen it is fine.

Any suggestions as to what is causing this problem?

Thanks,
Daniel Belton