Nec FS-5111

[dwayne]

I have a Nec FS-5111 that just has a horizontal line
going through the middle of it. the vertical has collapsed.
Has anyone got a quick tip/hint on a fix for this?

Ta
Dwayne

 

[Russell Griffiths]

"dwayne" <secretworks@hotmail.com> wrote in message news:<bm2cfd$pl3$1@mws-stat-syd.cdn.telstra.com.au>...

I have a Nec FS-5111 that just has a horizontal line
going through the middle of it. the vertical has collapsed.
Has anyone got a quick tip/hint on a fix for this?

Ta
Dwayne

Dwayne.
The fault may be the vertical deflection chip.
It may have shorted.
Also a fuseable resistor that supplies
power to this chip may be open.

I do not have a schematic, so I cannot help more than this.
I hope you know what you are doing, if not, please leave the job
for someone who does.
Good luck,
Russell.

 

[Dtrain]

thanks Russell

i would of loved to get a schematic on her.
but ill pull it out of the corner and have a look at it..
you know, one of those jobs you put off for months
hehehe


On 16 Oct 2003 06:25:47 -0700, rg26ce1991@hotmail.com (Russell
Griffiths) wrote:

Dwayne.
The fault may be the vertical deflection chip.
It may have shorted.
Also a fuseable resistor that supplies
power to this chip may be open.

I do not have a schematic, so I cannot help more than this.
I hope you know what you are doing, if not, please leave the job
for someone who does.
Good luck,
Russell.