NEC 27" TV Yoke Needed

  • Thread starter Shoreline Electronics
  • Start date
S

Shoreline Electronics

Guest
Make : NEC
Model : CT2750A

Set has strange convergence issues.....yoke has to be bad!

Does anyone have a junker to pull a yoke from. The number on this one is
48007363 but I would think most any of the NEC 27" CRT yokes will do.

Thanks for checking!

==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)
jstielau@snet.net
========================
"If you push something hard enough it will fall over."
Fudd's First Law of Opposition - Sir Sidney Fudd
 
Subject: NEC 27" TV Yoke Needed
From: "Shoreline Electronics" jstielau@snet.net
Date: 11/11/03 11:32 PM Eastern Standard Time
Message-id: <EJisb.19659$XY3.5987@newssvr33.news.prodigy.com


Make : NEC
Model : CT2750A

Set has strange convergence issues.....yoke has to be bad!
Click to expand...
It's definitely the yoke. The problem with a pull is that it might not survive
the shipping. The problem as I understand it is that the convergence shunts
inside the yoke housing are mounted in a mastic goo that dries up over the
years, and the shunts shift. IIRC, NAP yokes would sub into these NECs, but
I'm not positive.

John Del
Wolcott, CT

"Nothing is so opportune for tyrants as a people tired of its liberty."
Alan Keyes

(remove S for email reply)
 
It kinda looked like a NAP yoke.......I will investigate!

Thanks for the info John....


--
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)
jstielau@snet.net
========================
"If you push something hard enough it will fall over."
Fudd's First Law of Opposition - Sir Sidney Fudd


"John Del" <ohger1s@aol.com> wrote in message
news:20031112074640.02030.00000084@mb-m16.aol.com...
Subject: NEC 27" TV Yoke Needed
From: "Shoreline Electronics" jstielau@snet.net
Date: 11/11/03 11:32 PM Eastern Standard Time
Message-id: <EJisb.19659$XY3.5987@newssvr33.news.prodigy.com


Make : NEC
Model : CT2750A

Set has strange convergence issues.....yoke has to be bad!


It's definitely the yoke. The problem with a pull is that it might not
survive
the shipping. The problem as I understand it is that the convergence
shunts
inside the yoke housing are mounted in a mastic goo that dries up over the
years, and the shunts shift. IIRC, NAP yokes would sub into these NECs,
but
I'm not positive.

John Del
Wolcott, CT

"Nothing is so opportune for tyrants as a people tired of its liberty."
Alan Keyes

(remove S for email reply)
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top