monte carlo analysis help

[jc]

I need information about how to run montecarlo analysis in spectreS ,i
read some material
but idon't know where model files are available and how to change it to
run monte carlo
In our lab we aare using IC5.0 . Plz clearly expain me ,i am also new
to solaris.
Thanks in advance,
Jc

 

[John Gianni]

jc wrote:

I need information about how to run montecarlo analysis in spectreS
but idon't know where model files are available and how to change it to
run monte carlo

Try this Monte Carlo simulation step-by-step setup guide by Vikas
Sharma (with help from Michael Perrott of the Massachusetts Institute
of Technology, Phillip Allen of the Georgia Institute of Technology &
Andrew Beckett at Cadence).

http://eceserv0.ece.wisc.edu/~sharmav/monte.ppt

That powerpoint presentation walks you through the entire process,
covering every step on a sample LNA & PLL, from Monte Carlo setup to
simulation to final analysis, at:

If that guide doesn't do the trick, try these University of Colorado at
Boulder Monte Carlo simulation setup instructions by Prof. Regan A.
Zane.

http://ece-www.colorado.edu/~ecen5007/cadence/Monte_Carlo.html

If both fail you, there should be tutorials & user guides on the Monte
Carlo model-file setup on Sourcelink.

Good luck,
John Gianni
"Nothing I post is prior sanctioned nor reviewed by my employer!"

 

[jc]

Thank u very much those very helpful , I will try those



Thanks and regards
JC