Monitor Signal Cable Severed

[pillip]

My kids severed the signal cable from the monitor to the video card, so I
bought a SVGA Monitor cable and tried soldering the wires together. I have
managed to get the proper display, but the picture has a blue tinge to it.
Here is what I did:

From Monitor Cable (9 wires) To SVGA Cable (13
wires)
Red Video
Red Video
Green Video
Green Video
Blue Video
Blue Video
Yellow (Pin 14 V Sync) Black (Pin
14 V Sync)
White (Pin 13 H Sync) Yellow (Pin
13 H Sync)
Green (Pin 10 Sync Gnd) Black Yellow (Pin 10
Sync Gnd)
Brown (Pin 5 Gnd) Orange (Pin 5 Gnd) + White Orange
(Pin 5 Gnd)
Red (Pin 15 SCI)
White Red (Pin 15 SCI)
Orange (Pin 12 SDA) Red
(Pin 12 SDA)
White Video Gnd
White Brown (Pin 11)
Red Video Gnd
Red Video Gnd
Green Video Gnd
Green Video Gnd
Blue Video Gnd
Blue Video Gnd

The only wire left in the SVGA cable bundle is the brown wire (pin 4 Frame
Gnd). I would be grateful if you could help me out here. Taking the Monitor
to a service company is not an option. Oh the monitor is Hansol 910A.