Modifying RTL code - How to convert a VHDL Function to a Com

[KJ]

<zeev@cadence.com> wrote in message
news:ac24a695-d47d-43ec-93a9-0864321ebd19@q10g2000prf.googlegroups.com...

Hello all,
I need to do a massive surgery on an existing RTL code.
The objective is to generate a "hard" hierarchical layer around a VHDL
Function, by "hard" I mean that it'll be kept after synthesis - this
will help me in tools in the Flow downstream synthesis.

Help to do what? What really is the problem, and why would massive surgery
help? If there are problems with the existing code, they will be found in
simulation and/or static timing analysis not massive surgery without an
understanding of why one is doing the surgery. If however you're looking to
get data on resource usage than this might be useful since you do tend to
get reports on logic resource usage on a 'per entity' basis.

I thought about converting the function to a component first and then
connecting it to the processes in which the original function was
called in. This looks like "easier said than done..."

No it should be fairly trivial. The input parameters to the functions are
inputs to an entity, the single output of the function is an output of the
entity. Procedures can be converted in the same fashion.

As an alternative I would like to be able to isolate a small fraction
of this specific, called, function, e.g. a multiplication , and have
solid hierarchical boundary of this operation only.

So convert that small fraction into an entity/architecture and connect it
up.

I assume a Synthesis that is non aggressive, i.e: does not ungroup in
any way and does not do any boundary optimization.

You assume incorrectly.

Any idea on how to do this will be truly appreciated.
thx

I'd suggest not doing this since I doubt it will help you get to the root of
the real problem that you're trying to solve...whatever that problem might
actually be.

Kevin Jennings

 

[Mike Treseler]

zeev@cadence.com wrote:

I need to do a massive surgery on an existing RTL code.
The objective is to generate a "hard" hierarchical layer around a VHDL
Function,

Maybe you mean a vhdl design entity.
A function just returns a value and has no ports.

by "hard" I mean that it'll be kept after synthesis

That sounds like an design entity
or an instance of a design entity.

-- Mike Treseler

 

[Mike Treseler]

zeev@cadence.com wrote:

I need to do a massive surgery on an existing RTL code.
The objective is to generate a "hard" hierarchical layer around a VHDL
Function,

Maybe you mean a vhdl design entity.
A function just returns a value and has no ports.

by "hard" I mean that it'll be kept after synthesis

That sounds like an design entity
or an instance of a design entity.

-- Mike Treseler

 

Hello all,
I need to do a massive surgery on an existing RTL code.
The objective is to generate a "hard" hierarchical layer around a VHDL
Function, by "hard" I mean that it'll be kept after synthesis - this
will help me in tools in the Flow downstream synthesis.

I thought about converting the function to a component first and then
connecting it to the processes in which the original function was
called in. This looks like "easier said than done..."

As an alternative I would like to be able to isolate a small fraction
of this specific, called, function, e.g. a multiplication , and have
solid hierarchical boundary of this operation only.

I assume a Synthesis that is non aggressive, i.e: does not ungroup in
any way and does not do any boundary optimization.

Any idea on how to do this will be truly appreciated.
thx
\ZeevY

 

[radarman]

On Apr 5, 2:56 pm, z...@cadence.com wrote:

Hello all,
I need to do a massive surgery on an existing RTL code.
The objective is to generate a "hard" hierarchical layer around a VHDL
Function, by "hard" I mean that it'll be kept after synthesis - this
will help me in tools in the Flow downstream synthesis.

I thought about converting the function to a component first and then
connecting it to the processes in which the original function was
called in. This looks like "easier said than done..."

As an alternative I would like to be able to isolate a small fraction
of this specific, called, function, e.g. a multiplication , and have
solid hierarchical boundary of this operation only.

I assume a Synthesis that is non aggressive, i.e: does not ungroup in
any way and does not do any boundary optimization.

Any idea on how to do this will be truly appreciated.
thx
\ZeevY

1) Think carefully before tearing a design apart. Yes, it can
sometimes help when you need to understand what is going on. However,
I have learned from personal experience that you often create more
problems than you solve. I used to believe that when you took over a
design that the first thing you did was rewrite it. The trouble is,
you now have essentially a new design with all new bugs.

2) It should be trivial to write a VHDL component that wrappers a
function. Just implement the function it the same way you normally
would, but create an entity/architecture pair that isolates on the I/O
to the function. In place of the function call, instantiate the
wrapper, and wire up the I/O.

I don't see why this is preferable to simply using the function "in-
place", though. You have merely added another layer of complexity
without really gaining much. The only time I have considered doing
something like this was when I wanted to implement a free CRC
calculator that came in the form of a VHDL function. I created a "bus
wrapper" that allowed a SoC microcontroller access the function across
a bus. The wrapper also held address decoding logic and registers, so
it was a bit more than just a wrapper, but it more or less did what
you are describing.