Model Sony KDS 60-A2000 no vertical

Need your help once again group, and this is my own TV. Got the 4 red
blinks on the power light. Set won't come up. Web search says this
code is loss of verical. I can't find any info other than this. I
hoped that this problem would be somewhat common to this particular
model with a common fix. I don't have the schematic, but will have to
get it if no more info available about this problem. The set is out of
warranty and is only about 3 years old. Anyone aware of this as a
common issue with this set, and the fix? Thanks group.

 

[Phil Allison]

<stokesbr@cox.net>

Need your help once again group, and this is my own TV. Got the 4 red
blinks on the power light. Set won't come up. Web search says this
code is loss of verical. I can't find any info other than this. I
hoped that this problem would be somewhat common to this particular
model with a common fix. I don't have the schematic, but will have to
get it if no more info available about this problem. The set is out of
warranty and is only about 3 years old. Anyone aware of this as a
common issue with this set, and the fix? Thanks group.

** There is in fact a huge amount of info on your set on the net - all of it
bad news.

Sony rear projection sets like yours ( using SXRD ) are notorious lemons
with very high failure rates of the "optical block" . A number of class
action law suits against Sony in the USA have been settled or are still in
progress over the matter.

http://en.wikipedia.org/wiki/Silicon_X-tal_Reflective_Display

http://sites.google.com/site/sonylcdrptvproblems/



..... Phil

 

[Mark Zacharias]

<stokesbr@cox.net> wrote in message
news:9bf69c89-64ca-4bc1-a384-4fc85f6e9120@e21g2000vbl.googlegroups.com...

Need your help once again group, and this is my own TV. Got the 4 red
blinks on the power light. Set won't come up. Web search says this
code is loss of verical. I can't find any info other than this. I
hoped that this problem would be somewhat common to this particular
model with a common fix. I don't have the schematic, but will have to
get it if no more info available about this problem. The set is out of
warranty and is only about 3 years old. Anyone aware of this as a
common issue with this set, and the fix? Thanks group.

That error code refers to previous models. Yours has no such vertical
circuit. More likely a bad lamp.

Mark Z.