MMSIM61 cann't get the spectre results

When I use MMSIM61 work with IC5141, I cann't get the simulation
results. "ICW" says :No valid output signals available.
But the result database already existed. This problem always happened
when the results database bigger than 2GB.

 

From "Virtuoso Spectre Circuit Simulator Migration Guide"

Issues with Migrating from MMSIM 6.0 to MMSIM 6.1

In the MMSIM 6.1 release, the Virtuoso Spectre circuit simulator
supports unlimited PSF output size.
However, in the IC 5.1.41 flow, the PSF file size must be limited to
2G chunks for transient analysis
transpose mode and 2G for other analyses.

Set the following environment variable to enable the 2G chunking mode
for PSF transpose:

setenv PSF_WRITE_CHUNK_MODE_ON true

Set the following environment variables to enable the size limit for
other analyses:

setenv PSF_LARGE_FILE_ON false

Use these environment variables only in the IC5.1.41 flow.


Bernd

 

On 11ÔÂ29ČŐ, ĎÂÎç4Ęą48ˇÖ, bernd.fischerkrellenb...@gmail.com wrote:

From "Virtuoso Spectre Circuit Simulator Migration Guide"

Issues with Migrating from MMSIM 6.0 to MMSIM 6.1

In the MMSIM 6.1 release, the Virtuoso Spectre circuit simulator
supports unlimited PSF output size.
However, in the IC 5.1.41 flow, the PSF file size must be limited to
2G chunks for transient analysis
transpose mode and 2G for other analyses.

Set the following environment variable to enable the 2G chunking mode
for PSF transpose:

setenv PSF_WRITE_CHUNK_MODE_ON true

Set the following environment variables to enable the size limit for
other analyses:

setenv PSF_LARGE_FILE_ON false

Use these environment variables only in the IC5.1.41 flow.

Bernd

Thank you very very very much.
I'll try it now.

 

On 11ÔÂ29ČŐ, ĎÂÎç4Ęą48ˇÖ, bernd.fischerkrellenb...@gmail.com wrote:

From "Virtuoso Spectre Circuit Simulator Migration Guide"

Issues with Migrating from MMSIM 6.0 to MMSIM 6.1

In the MMSIM 6.1 release, the Virtuoso Spectre circuit simulator
supports unlimited PSF output size.
However, in the IC 5.1.41 flow, the PSF file size must be limited to
2G chunks for transient analysis
transpose mode and 2G for other analyses.

Set the following environment variable to enable the 2G chunking mode
for PSF transpose:

setenv PSF_WRITE_CHUNK_MODE_ON true

Set the following environment variables to enable the size limit for
other analyses:

setenv PSF_LARGE_FILE_ON false

Use these environment variables only in the IC5.1.41 flow.

Bernd

I want you know , It.s very important for me.
"ÄăĚŤÓвĹÁË,НН."