Mitsubishi U65 VCR component ident question!

N

nutprof

Guest
I've repaired the p.s. in my U65 that recently smoked (caught it before it
went into complete meltdown thankfully!!!) and it works but the
multi-function display is dead. 2 small resistors are smoked on the
diplay/timer pcb behind the front panel- R812 and R813 Could some kind soul
give me the values of them please?! Also the voltage rating of the zener
D822 beside them? THANKS! I used to frequent this group years ago when I was
working at a local consumer electronics repair shop, and I will never forget
the help I've received from the people here! An absolute goldmine of
knowledge is here! Thanks again!
-Graeme
 
Can no-one help me with these 2 resistors? Please?

"nutprof" <nuttyneo@hotmail.com> wrote in message
news:a_adnW2QE6E_48vTnZ2dnUVZ_uSdnZ2d@posted.vianet...
I've repaired the p.s. in my U65 that recently smoked (caught it before it
went into complete meltdown thankfully!!!) and it works but the
multi-function display is dead. 2 small resistors are smoked on the
diplay/timer pcb behind the front panel- R812 and R813 Could some kind
soul give me the values of them please?! Also the voltage rating of the
zener D822 beside them? THANKS! I used to frequent this group years ago
when I was working at a local consumer electronics repair shop, and I will
never forget the help I've received from the people here! An absolute
goldmine of knowledge is here! Thanks again!
-Graeme
 
On Sep 2, 9:41 pm, "nutprof" <nutty...@hotmail.com> wrote:
Can no-one help me with these 2 resistors? Please?

try eserviceinfo.com, see if the schematic is there.
good luck
B
 
thanks for the advice, but no luck.... :(

"b" <reverend_rogers@yahoo.com> wrote in message
news:a438a789-8f45-4ee4-a261-87a33688f350@m18g2000vbe.googlegroups.com...
On Sep 2, 9:41 pm, "nutprof" <nutty...@hotmail.com> wrote:
Can no-one help me with these 2 resistors? Please?

try eserviceinfo.com, see if the schematic is there.
good luck
B
 

Welcome to EDABoard.com

Sponsor

Back
Top