Mitsubishi Diamond Pro 17 Monitor Vertical raster problem

[Tony Benham]

I have a 10 year old Mitsubishi Diamond Pro 17 which has worked well for
many years. It has now developed a fault where after running for a while,
the picture becomes very large in the vertical direction, and obviously very
distorted vertically. Horizontal seems OK.
Does anyone have any clues where I could get schematics, or what might cause
this problem ?
Regards
Tony

 

[Gerald Spindler]

fcc id would be helpful.

check cap's in the Horizontal also in E/W and the E/W choppers......



"Tony Benham" <tonyb@removemekerrisway.freeserve.co.uk> schrieb im
Newsbeitrag news:3f22a70b$1@news.userve.net...

I have a 10 year old Mitsubishi Diamond Pro 17 which has worked well for
many years. It has now developed a fault where after running for a while,
the picture becomes very large in the vertical direction, and obviously
very
distorted vertically. Horizontal seems OK.
Does anyone have any clues where I could get schematics, or what might
cause
this problem ?
Regards
Tony

 

[Tony Benham]

I have a 10 year old Mitsubishi Diamond Pro 17 which has worked well for
many years. It has now developed a fault where after running for a
while,
the picture becomes very large in the vertical direction, and obviously
very
distorted vertically. Horizontal seems OK.
Does anyone have any clues where I could get schematics, or what might
cause
this problem ?
Regards
Tony

"Gerald Spindler" <aon.912669373@aon.at> wrote in message
news:3f2428d8$0$18914$91cee783@newsreader02.highway.telekom.at...

fcc id would be helpful.

check cap's in the Horizontal also in E/W and the E/W choppers......

Hi Gerald,

There is no fcc id on the monitor, the model no is TFS6705SETKL if that
helps ?
Regards
Tony

 

[Gerald Spindler]

hmm sorry no info on that model....

but i also made a mistake....

hor is ok check the vert. ic and the caps arround. i guess i can only be a
capacitor, 10 years is quite long for this electrolytical things......

regards


"Tony Benham" <tonyb@removemekerrisway.freeserve.co.uk> schrieb im
Newsbeitrag news:OkYUa.1071995$mA4.150306@news.easynews.com...

I have a 10 year old Mitsubishi Diamond Pro 17 which has worked well
for
many years. It has now developed a fault where after running for a
while,
the picture becomes very large in the vertical direction, and
obviously
very
distorted vertically. Horizontal seems OK.
Does anyone have any clues where I could get schematics, or what might
cause
this problem ?
Regards
Tony

"Gerald Spindler" <aon.912669373@aon.at> wrote in message
news:3f2428d8$0$18914$91cee783@newsreader02.highway.telekom.at...
fcc id would be helpful.

check cap's in the Horizontal also in E/W and the E/W choppers......

Hi Gerald,
There is no fcc id on the monitor, the model no is TFS6705SETKL if that
helps ?
Regards
Tony