Milles Griot 176B

G

GregS

Guest
I am looking for a power connector pinout on this supply.
Not the remote connector. Most of the connections are apparent, but
I'm trying to verify a fan output, as I'm told.

Greg
 
zekfrivo@zekfrivolous.com (GregS) writes:

I am looking for a power connector pinout on this supply.
Not the remote connector. Most of the connections are apparent, but
I'm trying to verify a fan output, as I'm told.
Click to expand...
Should be close to the other supplies that run similar lasers:

http://www.repairfaq.org/sam/laserasc.htm#ascom15

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
In article <usk6ov087.fsf@repairfaq.org>, sam@repairfaq.org (Samuel M. Goldwasser) wrote:
zekfrivo@zekfrivolous.com (GregS) writes:

I am looking for a power connector pinout on this supply.
Not the remote connector. Most of the connections are apparent, but
I'm trying to verify a fan output, as I'm told.

Should be close to the other supplies that run similar lasers:

http://www.repairfaq.org/sam/laserasc.htm#ascom15
Click to expand...
Thats looks good.

Greg
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top