Metcal handpiece

[Boris Mohar]

Greetings!

My MX500 handpiece went open in the handle. Does anybody know how to take it
apart?

--
Boris

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

 

On Wednesday, May 24, 2017 at 8:32:35 AM UTC-7, Boris Mohar wrote:

Greetings!

My MX500 handpiece went open in the handle. Does anybody know how to take it
apart?

--
Boris

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

You don't. You bite the bullet and buy a new one. There's a new one on eBay for $77 or you can go to Mouser for $104.25.

I use my Metcal quite a bit and am still on the same handpiece for 15 years but I do have a shiny new handpiece "just in case". Also, my Metcal was bought used on eBay.

G²

 

[Boris Mohar]

On Wed, 24 May 2017 12:13:41 -0700 (PDT), stratus46@yahoo.com wrote:

On Wednesday, May 24, 2017 at 8:32:35 AM UTC-7, Boris Mohar wrote:
Greetings!

My MX500 handpiece went open in the handle. Does anybody know how to take it
apart?

--
Boris

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

You don't. You bite the bullet and buy a new one. There's a new one on eBay for $77 or you can go to Mouser for $104.25.

I use my Metcal quite a bit and am still on the same handpiece for 15 years but I do have a shiny new handpiece "just in case". Also, my Metcal was bought used on eBay.

G˛

Actually I just managed to take it apart. I applied compressed air to the
tip entrance and the guts popped out like a champagne cork.

--
Boris

 

[N_Cook]

On 24/05/2017 20:13, stratus46@yahoo.com wrote:

On Wednesday, May 24, 2017 at 8:32:35 AM UTC-7, Boris Mohar wrote:
Greetings!

My MX500 handpiece went open in the handle. Does anybody know how to take it
apart?

--
Boris

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

You don't. You bite the bullet and buy a new one. There's a new one on eBay for $77 or you can go to Mouser for $104.25.

I use my Metcal quite a bit and am still on the same handpiece for 15 years but I do have a shiny new handpiece "just in case". Also, my Metcal was bought used on eBay.

G²

So it looks as though the OP may as well carefully "Dremmel" into there
and explore, and hopefully divulge if he finds weak spots, hollows ,
active areas etc

 

[N_Cook]

On 24/05/2017 21:31, Boris Mohar wrote:

On Wed, 24 May 2017 12:13:41 -0700 (PDT), stratus46@yahoo.com wrote:

On Wednesday, May 24, 2017 at 8:32:35 AM UTC-7, Boris Mohar wrote:
Greetings!

My MX500 handpiece went open in the handle. Does anybody know how to take it
apart?

--
Boris

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

You don't. You bite the bullet and buy a new one. There's a new one on eBay for $77 or you can go to Mouser for $104.25.

I use my Metcal quite a bit and am still on the same handpiece for 15 years but I do have a shiny new handpiece "just in case". Also, my Metcal was bought used on eBay.

G˛


Actually I just managed to take it apart. I applied compressed air to the
tip entrance and the guts popped out like a champagne cork.

I'll have to remember that, for the next plastic superglue/welded box I
come across

 

[Chris Jones]

On 25/05/2017 17:35, N_Cook wrote:

On 24/05/2017 21:31, Boris Mohar wrote:
On Wed, 24 May 2017 12:13:41 -0700 (PDT), stratus46@yahoo.com wrote:

On Wednesday, May 24, 2017 at 8:32:35 AM UTC-7, Boris Mohar wrote:
Greetings!

My MX500 handpiece went open in the handle. Does anybody know how
to take it
apart?

--
Boris

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

You don't. You bite the bullet and buy a new one. There's a new one
on eBay for $77 or you can go to Mouser for $104.25.

I use my Metcal quite a bit and am still on the same handpiece for 15
years but I do have a shiny new handpiece "just in case". Also, my
Metcal was bought used on eBay.

G˛


Actually I just managed to take it apart. I applied compressed
air to the
tip entrance and the guts popped out like a champagne cork.


I'll have to remember that, for the next plastic superglue/welded box I
come across

You open those by tapping them with the plastic handle of a screwdriver,
working along the seam. A long time ago mikeselectricstuff showed how to
do it on his youtube channel. I can't remember which video. The
technique works very well.