Memory

[ram]

Hi, <p>Can anyone recommmend some NVRAM or parallel EEPROM to interface with Spartan2 device.

 

[Steven K. Knapp]

Besides the serial configuration PROMs listed at ...
http://www.xilinx.com/isp/compfpgatables/prom_spartan.htm,

also take a look at the new Xilinx PlatformFlash, which is in-system
programmable via JTAG
http://www.xilinx.com/platformflash

Alternatively, you can use a merchant-market byte-wide Flash devices and a
small CPLD, as described in the following application note.
http://www.xilinx.com/xapp/xapp079.pdf

---------------------------------
Steven K. Knapp
Sr. Applications Manager, Xilinx Inc.
General Products Division
Spartan-3/II/IIE FPGAs
http://www.xilinx.com/spartan3
---------------------------------
Spartan-3: Make it Your ASIC

&lt;ram&gt; wrote in message news:ee7f986.-1@WebX.sUN8CHnE...

Hi,
Can anyone recommmend some NVRAM or parallel EEPROM to interface with
Spartan2 device.

 

[ram]

thankx for the help, but you got it wrong. <p>I dont want a configuration solution, I'm looking for something in which I can store my application data/parameters which will be overwritten if changed and stored for further use. That means I want a device which I can read from and write to without loosing the data on power down. <p>Hope this makes my problem clear. I'm looking for suggestions of any particular manufacturer/family of devices for the same. <p>Thanks and regards <BR>
Ram

 

[Peter Rauschert]

Hi, <p>Can anyone recommmend some NVRAM or parallel EEPROM to interface with Spartan2 device.

Look at Xilinx Site :

http://www.xilinx.com/isp/compfpgatables/prom_spartan.htm


Best Regards,
Peter