Melles Griot Laser Question

[Zer0]

I have come across a laser setup and I have been unable to find any
information about it, such as input power and mW power of these lasers.....
If anyone has any ideas where I may find this information or can point me in
the right direction it would be greatly appreciated....

Glen Perry

melles griot
670nm Class IIIb Laser
October 12, 1992
Serial - 1372 S1277RG1

 

[Sam Goldwasser]

"Zer0" <zer0tec@mchsi.com> writes:

I have come across a laser setup and I have been unable to find any
information about it, such as input power and mW power of these lasers.....
If anyone has any ideas where I may find this information or can point me in
the right direction it would be greatly appreciated....

Glen Perry

melles griot
670nm Class IIIb Laser
October 12, 1992
Serial - 1372 S1277RG1

These are usually alignment or medical positioning lasers, 5 mW max
collimated or with a line generator. A photo would help.

--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: The email address in this message header may no longer work. To
contact me, please use the Feedback Form at repairfaq.org. Thanks.

 

[Sam Goldwasser]

Sam Goldwasser <sam@saul.cis.upenn.edu> writes:

"Zer0" <zer0tec@mchsi.com> writes:

I have come across a laser setup and I have been unable to find any
information about it, such as input power and mW power of these lasers.....
If anyone has any ideas where I may find this information or can point me in
the right direction it would be greatly appreciated....

Glen Perry

melles griot
670nm Class IIIb Laser
October 12, 1992
Serial - 1372 S1277RG1

These are usually alignment or medical positioning lasers, 5 mW max
collimated or with a line generator. A photo would help.

In fact:

http://repairfaq.cis.upenn.edu/Misc/15753-1.jpg

is exactly as described, a dual line generator. I believe it runs on
12 VDC to the red and black wires.

--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: The email address in this message header may no longer work. To
contact me, please use the Feedback Form at repairfaq.org. Thanks.