Matlab and VHDL

I am relatively new to VHDL .. I want to know can I use a analog or
digital signal and read it in the computer as a signal (lets say
'test') using a Altera educational UP3 board which also has an FPGA on
it .... and then write code in Matlab to find different aspects(max
value, phase, amplitude etc) of that signal and then using those values
in my VHDL code ???

 

[Ralf Hildebrandt]

ronak283@gmail.com schrieb:

I am relatively new to VHDL .. I want to know can I use a analog or
digital signal and read it in the computer as a signal (lets say
'test') using a Altera educational UP3 board which also has an FPGA on
it ....

There is no analog-to-digital converter in at the UP2 education boards.
There are quite a lot of pins you may use for digital I/O
(FLEX_EXPAN_A/B/C).

and then write code in Matlab to find different aspects(max
value, phase, amplitude etc) of that signal and then using those values
in my VHDL code ???

Do I understand you right, that you want to sample analog data, read the
samples (in matlab), do some calculations there (real time or
post-processing) and feed the results back to the FPGA (real time?)?

What about using an external ADC, talk to this ADC with the FPGA
(digital), get the data and do the desired calculations inside the FPGA?

Ralf