Guest
Price:$380.00
Image: http://discountadvisor.info/image.php?id=B00009OYFC
Best deal: http://discountadvisor.info/index.php?id=B00009OYFC
I bought this kit because it was a good value especially with a rebate. You might think an included flashlight is useless but think again. You can get a lot of light time out of the battery attached to the flashlight and it's bright. Also, while the flashlight seems cheaply made (unlike the driver/drill, which seems very sturdy), the fact that it can stand up on the battery base and point anywhere in the room is nice when you are working with little light.The Makita unit is sturdy, designed well and fun to use. It may not be quite as smooth-running as the more expensive Panasonic cordless drivers, but for the money and bang for the buck, you can't beat Makita. I also like the way the Makita looks better than any other brand. It performs very well and I am not dissappointed at all. The included Makita case is a nice design and sturdy-a bit like a Pelican case. The Makita charger is also space saving. My only complaint is I wish the case was slightly smaller. It's about the size of a briefcase and there is a lot of empty space inside when you get the drill, batteries and charger loaded in. On the plus side, you can use this extra space for extra bits and other small handtools that y
ou might want to carry.
M Force variable speed reversing with 2 gear selection. 0 to 400 RPM and 0 to 1300 RPM. 2 piece, high performance motor with dual ball bearings. All metal gear transmission to withstand extreme demands. 18 torque settings in both high and low speed. 3 8"
ACCESSORIES:
Makita 784827-A Quad-Driver 4-Piece Reversible and Self-Centering Pre-Drill, Drive and Countersink Set:http://discountadvisor.info/index.php?id=B0000224F4
Makita 784832-A Quad-Driver 13-Piece Pre-Drill, Drive and Countersink Set:http://discountadvisor.info/index.php?id=B0000224F5
Makita 784874-A Ultralok 15-Piece Drilling and Driving Set:http://discountadvisor.info/index.php?id=B0000302SM
Makita 192077 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle for 6701D, 6720D, 6176D, 6791D and 6891D Drills:http://discountadvisor.info/index.php?id=B0007SXH6E
Makita 784000-A-A UltraLok 5 Piece 1/16-Inch to 3/16-Inch Hex Shank Drill Bit Assortment:http://discountadvisor.info/index.php?id=B000244YGA
Image: http://discountadvisor.info/image.php?id=B00009OYFC
Best deal: http://discountadvisor.info/index.php?id=B00009OYFC
I bought this kit because it was a good value especially with a rebate. You might think an included flashlight is useless but think again. You can get a lot of light time out of the battery attached to the flashlight and it's bright. Also, while the flashlight seems cheaply made (unlike the driver/drill, which seems very sturdy), the fact that it can stand up on the battery base and point anywhere in the room is nice when you are working with little light.The Makita unit is sturdy, designed well and fun to use. It may not be quite as smooth-running as the more expensive Panasonic cordless drivers, but for the money and bang for the buck, you can't beat Makita. I also like the way the Makita looks better than any other brand. It performs very well and I am not dissappointed at all. The included Makita case is a nice design and sturdy-a bit like a Pelican case. The Makita charger is also space saving. My only complaint is I wish the case was slightly smaller. It's about the size of a briefcase and there is a lot of empty space inside when you get the drill, batteries and charger loaded in. On the plus side, you can use this extra space for extra bits and other small handtools that y
ou might want to carry.
M Force variable speed reversing with 2 gear selection. 0 to 400 RPM and 0 to 1300 RPM. 2 piece, high performance motor with dual ball bearings. All metal gear transmission to withstand extreme demands. 18 torque settings in both high and low speed. 3 8"
ACCESSORIES:
Makita 784827-A Quad-Driver 4-Piece Reversible and Self-Centering Pre-Drill, Drive and Countersink Set:http://discountadvisor.info/index.php?id=B0000224F4
Makita 784832-A Quad-Driver 13-Piece Pre-Drill, Drive and Countersink Set:http://discountadvisor.info/index.php?id=B0000224F5
Makita 784874-A Ultralok 15-Piece Drilling and Driving Set:http://discountadvisor.info/index.php?id=B0000302SM
Makita 192077 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle for 6701D, 6720D, 6176D, 6791D and 6891D Drills:http://discountadvisor.info/index.php?id=B0007SXH6E
Makita 784000-A-A UltraLok 5 Piece 1/16-Inch to 3/16-Inch Hex Shank Drill Bit Assortment:http://discountadvisor.info/index.php?id=B000244YGA