B
Bob Widlicka
Guest
I am looking for documentation for a MACH 5 evaluation/demo
board I have. This board was made by AMD.
The only printing on the board (beside component reference
designators) is the words "Advanced Micro Devices" in the top
left corner, and the words "MACH 5, 160 I/Os, DEMO BOARD," on
the left side toward the middle. The board contains a socket for
a 208 PQFP MACH device. It also has a reset switch, connectors
for JTAG IN and JTAG OUT, a reset switch, 4-bit DIP switch,
and 4 large 7-segment LEDS. On each of the 4 sides of the
208-pin socket are 42 header posts for I/O connections to
the MACH 5 part.
Any documentation (or pointers to doc) would be appreciated.
I would like to use this board for some prototyping
and perhaps as a learning aid for some high school students.
I don't want to throw it out. Help!
Thanks,
Bob Widlicka
Lucent Technologies
widlicka@lucent.com
--
board I have. This board was made by AMD.
The only printing on the board (beside component reference
designators) is the words "Advanced Micro Devices" in the top
left corner, and the words "MACH 5, 160 I/Os, DEMO BOARD," on
the left side toward the middle. The board contains a socket for
a 208 PQFP MACH device. It also has a reset switch, connectors
for JTAG IN and JTAG OUT, a reset switch, 4-bit DIP switch,
and 4 large 7-segment LEDS. On each of the 4 sides of the
208-pin socket are 42 header posts for I/O connections to
the MACH 5 part.
Any documentation (or pointers to doc) would be appreciated.
I would like to use this board for some prototyping
and perhaps as a learning aid for some high school students.
I don't want to throw it out. Help!
Thanks,
Bob Widlicka
Lucent Technologies
widlicka@lucent.com
--