LVS Error: No matching ".SUBCKT" statement for "rhrpo_ckt_rf

Y

ykjing

Guest
Hi,
I have run assura LVS for a LNA circuit, which has RF componets, and the
result said it match its schematic. But I run Calibre LVS for the same LNA
circiut, there are " Error: No matching ".SUBCKT" statement for
"rhrpo_ckt_rf" at line... and " source could not be read".
Only RF components have above error, other component can be recognized.
Can someone kindly tell me how to solve the error.

Thank you in advance.
Regards.
Fred.
 
Dear Muzaffer Kal,

Thank you for you help. The problem solved. I asked our foundary for the rf
netlist and included them into my source file, as you said.

Thank you again.
Best Regards.
Fred.

"Muzaffer Kal" <kal@dspia.com>
??????:ho8334ppk68c0tf1ii8gbu3klmtd2rkm1t@4ax.com...
On Mon, 19 May 2008 23:48:41 +0800, "ykjing" <jhealthy@yeah.net
wrote:

Hi,
I have run assura LVS for a LNA circuit, which has RF componets, and the
result said it match its schematic. But I run Calibre LVS for the same LNA
circiut, there are " Error: No matching ".SUBCKT" statement for
"rhrpo_ckt_rf" at line... and " source could not be read".
Only RF components have above error, other component can be recognized.
Can someone kindly tell me how to solve the error.

Check how the RF component netlist files are included in the source
spice file. Calibre takes a single source input which has to include
all the necessary subcircuits. Make sure that all the included files
are accessible from the folder in which you are running Calibre; it's
possible that the include paths are no longer valid if you've moved
the source spice file to run Calibre.
Click to expand...
 
Dear Muzaffer Kal,

Thank you for you help. The problem solved. I asked our foundary for the rf
netlist and included them into my source file, as you said.

Thank you again.
Best Regards.
Fred.

"Muzaffer Kal" <kal@dspia.com>
??????:ho8334ppk68c0tf1ii8gbu3klmtd2rkm1t@4ax.com...
On Mon, 19 May 2008 23:48:41 +0800, "ykjing" <jhealthy@yeah.net
wrote:

Hi,
I have run assura LVS for a LNA circuit, which has RF componets, and the
result said it match its schematic. But I run Calibre LVS for the same LNA
circiut, there are " Error: No matching ".SUBCKT" statement for
"rhrpo_ckt_rf" at line... and " source could not be read".
Only RF components have above error, other component can be recognized.
Can someone kindly tell me how to solve the error.

Check how the RF component netlist files are included in the source
spice file. Calibre takes a single source input which has to include
all the necessary subcircuits. Make sure that all the included files
are accessible from the folder in which you are running Calibre; it's
possible that the include paths are no longer valid if you've moved
the source spice file to run Calibre.
Click to expand...
 
On Mon, 19 May 2008 23:48:41 +0800, "ykjing" <jhealthy@yeah.net>
wrote:

Hi,
I have run assura LVS for a LNA circuit, which has RF componets, and the
result said it match its schematic. But I run Calibre LVS for the same LNA
circiut, there are " Error: No matching ".SUBCKT" statement for
"rhrpo_ckt_rf" at line... and " source could not be read".
Only RF components have above error, other component can be recognized.
Can someone kindly tell me how to solve the error.
Click to expand...
Check how the RF component netlist files are included in the source
spice file. Calibre takes a single source input which has to include
all the necessary subcircuits. Make sure that all the included files
are accessible from the folder in which you are running Calibre; it's
possible that the include paths are no longer valid if you've moved
the source spice file to run Calibre.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top