LT Spice Trick...

[John Larkin]

Not everyone may know this one.

Given a series string of unconnected parts, you can select the wire
tool, the pencil icon, and draw one long line through all the parts to
do the connections. You can even turn corners.

 

[Lasse Langwadt Christensen]

lørdag den 1. juli 2023 kl. 16.40.50 UTC+2 skrev John Larkin:

Not everyone may know this one.

Given a series string of unconnected parts, you can select the wire
tool, the pencil icon, and draw one long line through all the parts to
do the connections. You can even turn corners.

you can also place a part on a wire

 

[Phil Hobbs]

John Larkin <jlarkin@highlandSNIPMEtechnology.com> wrote:

Not everyone may know this one.

Given a series string of unconnected parts, you can select the wire
tool, the pencil icon, and draw one long line through all the parts to
do the connections. You can even turn corners.

There’s a control panel setting to turn that behavior off, ie to allow
straight line connections between pins.

--
Dr Philip C D Hobbs Principal Consultant ElectroOptical Innovations LLC /
Hobbs ElectroOptics Optics, Electro-optics, Photonics, Analog Electronics