J
jjl
Guest
Everybody,
(Excuse my sales pitch at this forum..
but lots of folks are asking about where to
start with FPGAs..)
A new FPGA Development Board is out at:
http://www.cmosexod.com/fnd.htm
This board is ideal for:
- Novice or everyone else just wanting to start out
exploring FPGAs.
- SW engineers wishing to get into HW
( no need to mess with solder and irons
and plug-in boards - unless you
want to )
- HW engineers wishing for a low-cost and yet
capable and expandable development board
which can be turned into a permanent board.
( no need to design another board
after your FPGA design is completed. Use
this board to permanently house your design. )
- The board is specially design to have the most
needed features. You won't be buying an expensive
"everything board" just to use 1 or 2 features
of the board. Similarly, if you need features
not present on the board, you can plug in your
own board.
This is a low-cost (relatively speaking), complete with
most frequently used peripherals. Lots of expansion connectors
allows cascading several boards or add your own "daughter" board.
YOU GET A BOARD AND A COMPUTER:
===============================
The Board comes with a complete Computer System core, so
it works right out of the box. It shows the potentials
of the board. Plug in a VGA monitor a keyboard and mouse
and start writing your own application.
The Computer core is yours to keep. The bitstream image of
it is included in the CD, so you can always reload the
board with it.
(Excuse my sales pitch at this forum..
but lots of folks are asking about where to
start with FPGAs..)
A new FPGA Development Board is out at:
http://www.cmosexod.com/fnd.htm
This board is ideal for:
- Novice or everyone else just wanting to start out
exploring FPGAs.
- SW engineers wishing to get into HW
( no need to mess with solder and irons
and plug-in boards - unless you
want to )
- HW engineers wishing for a low-cost and yet
capable and expandable development board
which can be turned into a permanent board.
( no need to design another board
after your FPGA design is completed. Use
this board to permanently house your design. )
- The board is specially design to have the most
needed features. You won't be buying an expensive
"everything board" just to use 1 or 2 features
of the board. Similarly, if you need features
not present on the board, you can plug in your
own board.
This is a low-cost (relatively speaking), complete with
most frequently used peripherals. Lots of expansion connectors
allows cascading several boards or add your own "daughter" board.
YOU GET A BOARD AND A COMPUTER:
===============================
The Board comes with a complete Computer System core, so
it works right out of the box. It shows the potentials
of the board. Plug in a VGA monitor a keyboard and mouse
and start writing your own application.
The Computer core is yours to keep. The bitstream image of
it is included in the CD, so you can always reload the
board with it.