Looking for MC1554G data sheets

M

Mostafa Kassem

Guest
The subject says it all. I did the Google and Yahoo thing with no luck.

While we are at it, I am also looking for any info on EP220 power transistor.

TIA.

Mostafa


--
----------------------------------------
Mostafa Kassem
M Dot Kassem At ieee Dot org
---------------------------------------
 
On Sat, 31 Jul 2004 01:14:55 GMT, Mostafa Kassem <No_one@Nowhere.com>
wrote:

The subject says it all. I did the Google and Yahoo thing with no luck.

[snip]

Mostafa
Click to expand...
I have that data book (and I designed the output stage).
Unfortunately my general purpose machine, with the scanner on it, took
a dive this afternoon. PII, ten years old, 400MHz, originally had
Win95 on it, now has Win2K ;-)

So it'll be several days to a week before I have a replacement up and
running :-(

(Right now I'm running off my laptop which has only Eudora, Agent and
PSpice on it :)
 
Jim Thompson caused an illegal operation in module
<6atlg0dv3nm5qbfn98fa9snjbdne0vah9o@4ax.com> at thegreatone@example.com and
will be closed:
On Sat, 31 Jul 2004 01:14:55 GMT, Mostafa Kassem <No_one@Nowhere.com
wrote:

The subject says it all. I did the Google and Yahoo thing with no luck.

[snip]

Mostafa

I have that data book (and I designed the output stage).
Unfortunately my general purpose machine, with the scanner on it, took
a dive this afternoon. PII, ten years old, 400MHz, originally had
^^^^^^^^
Click to expand...

Win95 on it, now has Win2K ;-)
Click to expand...
10 year old Pentium II? :) My 233MHz Pentium is just 6 years old. It's still
alive - I am using it to post this (and to browse the Internet, and to run
small simulations in LTSpice - it has only 64MB RAM and 1.6GB hard drive).

[]s
--
Chaos MasterŽ, posting from Brazil. REPLY TO GROUP!
MSN: wizard_of_yendor@hotmail.com http://marreka.no-ip.com
"You touch the green wire. You get hit by 75kV.
You are electrocuted. DYWYPI? [yn]"
 
Jim Thompson wrote:
On Sat, 31 Jul 2004 01:14:55 GMT, Mostafa Kassem <No_one@Nowhere.com
wrote:


The subject says it all. I did the Google and Yahoo thing with no luck.


[snip]

Mostafa


I have that data book (and I designed the output stage).
Unfortunately my general purpose machine, with the scanner on it, took
a dive this afternoon. PII, ten years old, 400MHz, originally had
Win95 on it, now has Win2K ;-)

So it'll be several days to a week before I have a replacement up and
running :-(

OK, thanks. Most of the hits I got from Google were about your design. One
Click to expand...
of them was about you losing a bet to Tom Frederiksen when he was able to
run it at 5W.

Best regards,

Mostafa

(Right now I'm running off my laptop which has only Eudora, Agent and
PSpice on it :)
Click to expand...

--
----------------------------------------
Mostafa Kassem
M Dot Kassem At ieee Dot org
---------------------------------------
 
On Sat, 31 Jul 2004 12:30:35 GMT, Mostafa Kassem <No_one@Nowhere.com>
wrote:

Jim Thompson wrote:
On Sat, 31 Jul 2004 01:14:55 GMT, Mostafa Kassem <No_one@Nowhere.com
wrote:


The subject says it all. I did the Google and Yahoo thing with no luck.


[snip]

Mostafa


I have that data book (and I designed the output stage).
Unfortunately my general purpose machine, with the scanner on it, took
a dive this afternoon. PII, ten years old, 400MHz, originally had
Win95 on it, now has Win2K ;-)

So it'll be several days to a week before I have a replacement up and
running :-(

OK, thanks. Most of the hits I got from Google were about your design. One
of them was about you losing a bet to Tom Frederiksen when he was able to
run it at 5W.

Best regards,

Mostafa

(Right now I'm running off my laptop which has only Eudora, Agent and
PSpice on it :)
Click to expand...
I managed to get it to boot this AM and am copying all contents across
the network to another machine with a large drive. After I'm safely
backed-up I'll try to figure out why keyboard and mouse no longer
function.
 
nice AC EMF spike from the cords wrapped around AC lines?
i know that happen to me once.
has a storm near by, afterwards the keyboard, mouse and controlers
for which on the mother board no longer worked but it would boot up
and required no sign in etc..


Jim Thompson wrote:

On Sat, 31 Jul 2004 12:30:35 GMT, Mostafa Kassem <No_one@Nowhere.com
wrote:


Jim Thompson wrote:

On Sat, 31 Jul 2004 01:14:55 GMT, Mostafa Kassem <No_one@Nowhere.com
wrote:



The subject says it all. I did the Google and Yahoo thing with no luck.


[snip]


Mostafa


I have that data book (and I designed the output stage).
Unfortunately my general purpose machine, with the scanner on it, took
a dive this afternoon. PII, ten years old, 400MHz, originally had
Win95 on it, now has Win2K ;-)

So it'll be several days to a week before I have a replacement up and
running :-(


OK, thanks. Most of the hits I got from Google were about your design. One
of them was about you losing a bet to Tom Frederiksen when he was able to
run it at 5W.

Best regards,

Mostafa


(Right now I'm running off my laptop which has only Eudora, Agent and
PSpice on it :)


I managed to get it to boot this AM and am copying all contents across
the network to another machine with a large drive. After I'm safely
backed-up I'll try to figure out why keyboard and mouse no longer
function.
Click to expand...
 
On Sat, 31 Jul 2004 01:14:55 GMT, Mostafa Kassem <No_one@Nowhere.com>
wrote:

The subject says it all. I did the Google and Yahoo thing with no luck.

While we are at it, I am also looking for any info on EP220 power transistor.

TIA.

Mostafa
Click to expand...
"MC1554-Data.zip" posted to the S.E.D/Schematics page of my website.

Data book info only, sorry, no Spice model :-(

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice:(480)460-2350 | |
| E-mail Address at Website Fax:(480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
 
You're probably better off redesigning to use something
that's currently being manufactured. The Motorola MC1554G
was discontinued years ago. Motorola sold off their semiconductor
business to Freestyle Semiconductor, and they don't make that part.
Even Rochester Electronics, which stocks obsolete parts, doesn't
have it.

John Nagle

Mostafa Kassem wrote:
The subject says it all. I did the Google and Yahoo thing with no luck.

While we are at it, I am also looking for any info on EP220 power
transistor.

TIA.

Mostafa
Click to expand...
 
On Mon, 02 Aug 2004 05:21:31 GMT, John Nagle <nagle@animats.com>
wrote:

You're probably better off redesigning to use something
that's currently being manufactured. The Motorola MC1554G
was discontinued years ago. Motorola sold off their semiconductor
business to Freestyle Semiconductor, and they don't make that part.
Even Rochester Electronics, which stocks obsolete parts, doesn't
have it.

John Nagle

Mostafa Kassem wrote:
The subject says it all. I did the Google and Yahoo thing with no luck.

While we are at it, I am also looking for any info on EP220 power
transistor.

TIA.

Mostafa
Click to expand...
Most of the MC1554 era stuff was sold off to Lansdale, who still make
a lot of my golden oldies, the RS232 chip set, the TTL and PECL PLL
parts, and they even still make my very first chip design, the
MC1530/31 OpAmp. But they don't make the MC1554... by today's
standards it's a kludge, once PNPs made it to the monolithic world.

Freestyle (is that what it's called?) got the specialty CMOS. ON
Semiconductor has the jelly bean level CMOS.

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice:(480)460-2350 | |
| E-mail Address at Website Fax:(480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top