Local SMD part placement service?

[Bruce Varley]

There are outfits OS that sell SMD/DIP adaptors, that also offer part
placement service at a reasonable rate for small quantities, with no setup
fee. Is there anything in Oz?

 

[who where]

On Fri, 28 Oct 2011 09:45:04 +0800, "Bruce Varley" <bv@NoSpam.com>
wrote:

There are outfits OS that sell SMD/DIP adaptors, that also offer part
placement service at a reasonable rate for small quantities, with no setup
fee. Is there anything in Oz?

Here in Perth, Tri Electronics in O/P. Tri is the "owner" (his missus
is actually the BOSS). I have used them for through-hole short runs
(20 boards) and I have been assured that they have SMD p-n-p
capability.

There is one in Malaga (name escapes me, more expensive) and one at
the top end of Tomlinson in Welshpool (ditto). There are probably
others I'm not aware of. Give Tri a try.

 

[atec77]

On 29/10/2011 5:23 PM, who where wrote:

On Fri, 28 Oct 2011 09:45:04 +0800, "Bruce Varley"<bv@NoSpam.com
wrote:

There are outfits OS that sell SMD/DIP adaptors, that also offer part
placement service at a reasonable rate for small quantities, with no setup
fee. Is there anything in Oz?

Here in Perth, Tri Electronics in O/P. Tri is the "owner" (his missus
is actually the BOSS). I have used them for through-hole short runs
(20 boards) and I have been assured that they have SMD p-n-p
capability.

There is one in Malaga (name escapes me, more expensive) and one at
the top end of Tomlinson in Welshpool (ditto). There are probably
others I'm not aware of. Give Tri a try.
The is a place in Northern Nsw

Watching ch31 digital there is a programme calle restoring dreams and
the company is promoted there , very very fast machine and the stated
would de small lots from 6 or 8 boards if you are prepared to pay

--
X-No-Archive: Yes

 

[Dennis]

"who where" <noone@home.net> wrote in message
news:6m9na7hg4elml4uc1o994193btntk4gf36@4ax.com...

On Fri, 28 Oct 2011 09:45:04 +0800, "Bruce Varley" <bv@NoSpam.com
wrote:

There are outfits OS that sell SMD/DIP adaptors, that also offer part
placement service at a reasonable rate for small quantities, with no setup
fee. Is there anything in Oz?

Here in Perth, Tri Electronics in O/P. Tri is the "owner" (his missus
is actually the BOSS). I have used them for through-hole short runs
(20 boards) and I have been assured that they have SMD p-n-p
capability.

There is one in Malaga (name escapes me, more expensive) and one at
the top end of Tomlinson in Welshpool (ditto). There are probably
others I'm not aware of. Give Tri a try.

Also maybe try Pace (good quality) in Joondalup
PACE Assembly (Juergen) www.pace-assembly.com/contact.html


or possibly cheaper in Malaga:
ElectAss (Gary Kunej) http://www.pcbassemblyperth.com.au/

 

[who where]

On Sat, 29 Oct 2011 17:00:06 +0800, "Dennis"
<jon.dough@ithemorgue.com> wrote:

"who where" <noone@home.net> wrote in message
news:6m9na7hg4elml4uc1o994193btntk4gf36@4ax.com...
On Fri, 28 Oct 2011 09:45:04 +0800, "Bruce Varley" <bv@NoSpam.com
wrote:

There are outfits OS that sell SMD/DIP adaptors, that also offer part
placement service at a reasonable rate for small quantities, with no setup
fee. Is there anything in Oz?

Here in Perth, Tri Electronics in O/P. Tri is the "owner" (his missus
is actually the BOSS). I have used them for through-hole short runs
(20 boards) and I have been assured that they have SMD p-n-p
capability.

There is one in Malaga (name escapes me, more expensive) and one at
the top end of Tomlinson in Welshpool (ditto). There are probably
others I'm not aware of. Give Tri a try.

ElectAss (Gary Kunej) http://www.pcbassemblyperth.com.au/

Yep, that's the one I had in mind.

 

[Dennis]

"who where" <noone@home.net> wrote in message
news:09jna75vv0778leet2qbnm3cn3j39f4pam@4ax.com...

On Sat, 29 Oct 2011 17:00:06 +0800, "Dennis"
jon.dough@ithemorgue.com> wrote:


"who where" <noone@home.net> wrote in message
news:6m9na7hg4elml4uc1o994193btntk4gf36@4ax.com...
On Fri, 28 Oct 2011 09:45:04 +0800, "Bruce Varley" <bv@NoSpam.com
wrote:

There are outfits OS that sell SMD/DIP adaptors, that also offer part
placement service at a reasonable rate for small quantities, with no
setup
fee. Is there anything in Oz?

Here in Perth, Tri Electronics in O/P. Tri is the "owner" (his missus
is actually the BOSS). I have used them for through-hole short runs
(20 boards) and I have been assured that they have SMD p-n-p
capability.

There is one in Malaga (name escapes me, more expensive) and one at
the top end of Tomlinson in Welshpool (ditto). There are probably
others I'm not aware of. Give Tri a try.

ElectAss (Gary Kunej) http://www.pcbassemblyperth.com.au/

Yep, that's the one I had in mind.

I thought it might be - it took me 5 minutes of ruminating until I could
remember the name.

 

[who where]

On Sat, 29 Oct 2011 19:04:31 +0800, "Dennis"
<jon.dough@ithemorgue.com> wrote:

"who where" <noone@home.net> wrote in message
news:09jna75vv0778leet2qbnm3cn3j39f4pam@4ax.com...
On Sat, 29 Oct 2011 17:00:06 +0800, "Dennis"
jon.dough@ithemorgue.com> wrote:


"who where" <noone@home.net> wrote in message
news:6m9na7hg4elml4uc1o994193btntk4gf36@4ax.com...
On Fri, 28 Oct 2011 09:45:04 +0800, "Bruce Varley" <bv@NoSpam.com
wrote:

There are outfits OS that sell SMD/DIP adaptors, that also offer part
placement service at a reasonable rate for small quantities, with no
setup
fee. Is there anything in Oz?

Here in Perth, Tri Electronics in O/P. Tri is the "owner" (his missus
is actually the BOSS). I have used them for through-hole short runs
(20 boards) and I have been assured that they have SMD p-n-p
capability.

There is one in Malaga (name escapes me, more expensive) and one at
the top end of Tomlinson in Welshpool (ditto). There are probably
others I'm not aware of. Give Tri a try.

ElectAss (Gary Kunej) http://www.pcbassemblyperth.com.au/

Yep, that's the one I had in mind.

I thought it might be - it took me 5 minutes of ruminating until I could
remember the name.

I had Gary's name but couldn't recall their biz-name. Actually only
threw out his biz-card a couple of weeks back.