LF flanged BNC connector

Hi all,
I'm trying to find a replacement/info for a Bendix 9732-2 BNC panel
mount connector. All I can google are panel mounts with solder
connections, I'm looking for a round flange with threaded mounting and
cable clamp like in the picture:
http://www.dfpresource.org/bendix_bnc.jpg
The thing is, it's a 40 year old assembly, the rubber boot inside the
clamp is as hard as a rock and jammed tight, it's not coming out in one
piece. So before I destroy it, can someone either tell me if I can
remove the center pin for cleaning, or where to get a whole new
connector?

 

[Brian]

On 1 Oct 2005 06:17:22 -0700, a7yvm109gf5d1@netzero.com wrote:

Hi all,
I'm trying to find a replacement/info for a Bendix 9732-2 BNC panel
mount connector. All I can google are panel mounts with solder
connections, I'm looking for a round flange with threaded mounting and
cable clamp like in the picture:
http://www.dfpresource.org/bendix_bnc.jpg
The thing is, it's a 40 year old assembly, the rubber boot inside the
clamp is as hard as a rock and jammed tight, it's not coming out in one
piece. So before I destroy it, can someone either tell me if I can
remove the center pin for cleaning, or where to get a whole new
connector?

Tektronix used that bendix connector to source their part number
131-0390-00. You might try Tektronix directly, or give Walter Shawlee
at Sphere Research http://www.sphere.bc.ca/test/index.html a call -
he's got dang near everything Tektronix.

Brian

 

Heh, that's awesome, the thought didn't even cross my mind! I'll look
into it.
Thanks!