LeCroy Arbitrary Waveform Generator LW420

[P.Reich]

Hi,

can somebody help us with the software installation floppy disks or an
image of the hard disk for the device?
The hard disk stopped to respond and we have to reinstall the software
on a new one.

Have found nothing to download on the manufacturer WEB site.

Regards.

 

[imett]

hello i've also this test equipment work well but i can't make a copy
of the hd , i don't remember what is its size ,400MB? i don't know if
with a simple copy you can put the file and use your generator

P.Reich ha scritto:

Hi,

can somebody help us with the software installation floppy disks or an
image of the hard disk for the device?
The hard disk stopped to respond and we have to reinstall the software
on a new one.

Have found nothing to download on the manufacturer WEB site.

Regards.

 

[P.Reich]

We had 170 MB, another 540-MB disk was accepted by BIOS without
problems as our LW420 is just a 486DX PC.
To make an image as well as to put it on a new disk it would be
necessary to put the disk in another PC.
You are right - it could happen that just an image will not work but it
would be worth to try.
At least we will see what is the file system, the DOS used and
hopefully there will be possibility to adapt the parameters to our
device.

Installation floppies will be of course a much easier way but it looks
to be very difficult to get them

Regards. Peter.

imett schrieb:

hello i've also this test equipment work well but i can't make a copy
of the hd , i don't remember what is its size ,400MB? i don't know if
with a simple copy you can put the file and use your generator