Laptop does not see LAN Card

[Bud Moore]

I have a Toshiba Satellite (3-4 years old) running XP. When I insert a
card of any type e.i. modem, lan, etc I get no reaction from the
computer. I had the same problem before I changed from WIN98.

Anyone have any ideas?

Thanks in advance.

 

[Dbowey]

Bud posted:
<< I have a Toshiba Satellite (3-4 years old) running XP. When I insert a
card of any type e.i. modem, lan, etc I get no reaction from the
computer. I had the same problem before I changed from WIN98.
Some systems, and WIN98 is one of them, include drivers, etc. for some
hardware. If the system does not locate the information, it is necessary for
you to provide a disc with the drivers for your hardware.

I suspect you may be omitting something in the installation process.

Don

 

[Henry Mydlarz]

"Bud Moore" <bud@more.com> wrote in message
news:2dco60d7d3s0r4g52hs0pud8l6h1fri8qj@4ax.com...

I have a Toshiba Satellite (3-4 years old) running XP. When I insert a
card of any type e.i. modem, lan, etc I get no reaction from the
computer. I had the same problem before I changed from WIN98.

Anyone have any ideas?

Thanks in advance.

I do not have experience with Toshiba laptops, only with IBM Thinkpads. IBM
has a support site with all necessary drivers. An IBM laptop requires
drivers to enable a PCMCIA card to be recognized. It is very likely this is
the case with a Toshiba laptop. I would go to the Toshiba internet site and
find the driver page/s. Enter the model number and you should be able to get
all the drivers.

Henry

 

[Art]

Use your desktop, go the company website for the specific LAN card you are
attempting to use, and download the latest drivers for XP. Copy these files
to either a cd or floppy. Reboot the laptop and install the drivers via the
control panel, new hardware installation. Have done this many times with
good success. Another question, are you sure that the PCMCIA Slot is
functioning properly, maybe you need to go to Toshiba's side and download a
set of drivers specific to your model of laptop.
"Henry Mydlarz" <henspammyd@optushome.com.au> wrote in message
news:406c82fc$0$16600$5a62ac22@freenews.iinet.net.au...

"Bud Moore" <bud@more.com> wrote in message
news:2dco60d7d3s0r4g52hs0pud8l6h1fri8qj@4ax.com...
I have a Toshiba Satellite (3-4 years old) running XP. When I insert a
card of any type e.i. modem, lan, etc I get no reaction from the
computer. I had the same problem before I changed from WIN98.

Anyone have any ideas?

Thanks in advance.

I do not have experience with Toshiba laptops, only with IBM Thinkpads.
IBM
has a support site with all necessary drivers. An IBM laptop requires
drivers to enable a PCMCIA card to be recognized. It is very likely this
is
the case with a Toshiba laptop. I would go to the Toshiba internet site
and
find the driver page/s. Enter the model number and you should be able to
get
all the drivers.

Henry

 

Bud,

Hi!

Means only two things, your PC Card interface doesn't have the right
drivers or it is faulty. Win98/Xp should typically contain a usable PC
Card driver since there aren't that many vendor type for this things.
Opps, one more thing, there are two common types of PC Cards, the 16-bit
and the 32 bit/Cardbus (one with the gold metal sheet near the connector).
Cardbus types aren't backwards compatible with the 16-bit PC Card slots.

It would be better if you included the model number of your notebook. This
would help for software issues. Another obvious thing is the PC Card
connector, try to see if the pins are OK. If not then this isn't for
newbies. It could be a bad solder joint between the PC Card slot and the
mainboard. This is common for problem for surface mount types vs. the
through-hole. Blame miniaturization for this. If it's the controller chip
then that's another story.

Regards.

Jo


Bud Moore wrote:

I have a Toshiba Satellite (3-4 years old) running XP. When I insert a
card of any type e.i. modem, lan, etc I get no reaction from the
computer. I had the same problem before I changed from WIN98.

Anyone have any ideas?

Thanks in advance.