Jaycar JC55 speaker kit

D

damian

Guest
I bought the JC55 speaker kit without cabinet from Jaycar, only to find
that the included instructions contain dimensions of the cabinet, but no
dimensions regarding the location of the drivers or port. If anyone has
this information it would be appreciated.

Damian
 
"damian" <damian@nospam.com> wrote in message
news:4072a023$0$16965$afc38c87@news.optusnet.com.au...
I bought the JC55 speaker kit without cabinet from Jaycar, only to find
that the included instructions contain dimensions of the cabinet, but no
dimensions regarding the location of the drivers or port. If anyone has
this information it would be appreciated.

Damian

Contact Jaycar
 
GM wrote:
"damian" <damian@nospam.com> wrote in message
news:4072a023$0$16965$afc38c87@news.optusnet.com.au...

I bought the JC55 speaker kit without cabinet from Jaycar, only to find
that the included instructions contain dimensions of the cabinet, but no
dimensions regarding the location of the drivers or port. If anyone has
this information it would be appreciated.

Damian



Contact Jaycar
I have already emailed Jaycar, and even though their advertising states
there are no cabinets left, and I was informed there were no cabinets
local Jaycar shop when I purchased the kit, I recieved the following
response.

"Dear Damian,

All available information about the cabinets has been included with the
speaker kit.
Unfortunately the manufacturer has sold his business and we can not get
further information.
You may wish to contact the closest Jaycar store and see if by chance a
cabinet set is available."


This is why I turned to the newsgroup.
 
Iam pretty sure Mine are the JC55,

They have 2 x 6.5 cm woofers, and 2 tweeters?
These are the measurements to the holes for each speaker/port or tweeter.

Form the top, it is 17.5 Cms to the First Port (which is 6.5 Cm wide)
Then 4.5 Cm to the first Woofer which is 15.5 cms wide,
and then 2.5 cms to the Tweeter which is 8.5 Cms,
and then 2.5 spacing to the next Woofer, which is of cause a hole15.5 cm,
and then its 4.5 to the bottom Port which is the same as the first one
(6.5cms).
Ports are 20 cms long.

They are all in the down the middle of the speaker,
and sound great.
Have had mine for quite some time and they punch a really good Bass and good
top end.

hope this helps..
Allan

"damian" <damian@nospam.com> wrote in message
news:4072a023$0$16965$afc38c87@news.optusnet.com.au...
I bought the JC55 speaker kit without cabinet from Jaycar, only to find
that the included instructions contain dimensions of the cabinet, but no
dimensions regarding the location of the drivers or port. If anyone has
this information it would be appreciated.

Damian
 

Welcome to EDABoard.com

Sponsor

Back
Top