ISE 6.1.03i Linux...

[Fouad]

Hi all,

I have installed ISE 6.1.03i, and I can't get impact to program my
development board, using the parallel port... in the cable setup all
the options other than the serial interface is unavailable. the board
and parallel interface work under windows.. and with VMWare... Thanks
for your help

Fouad

 

[Andrew Greensted]

I've just been going through the same process. The older parallel cable
is not supported under linux in ISE 6.1. Apparently we'll have to wait
for 6.2.

There are some previous posts on this matter.
Sorry it's only bad news

Andy
Fouad wrote:

Hi all,

I have installed ISE 6.1.03i, and I can't get impact to program my
development board, using the parallel port... in the cable setup all
the options other than the serial interface is unavailable. the board
and parallel interface work under windows.. and with VMWare... Thanks
for your help

Fouad

--
Andrew Greensted Department of Electronics
Bio-Inspired Engineering University of York, UK

Tel: +44(0)1904 432379 Mailto: ajg112@ohm.york.ac.uk
Fax: +44(0)1904 433224 Web: www.bioinspired.com