ISE 12.4

M

Michael

Guest
Hi,

I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS 64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?



INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX
for PM
base Process will terminate. For technical support on this issue,
please
open a WebCase with this project attached at
http://www.xilinx.com/support.
Release 12.4 - Map M.81d (lin64)


/michael
 
Hi,

I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS 64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?



INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX
for PM
base Process will terminate. For technical support on this issue,
please
open a WebCase with this project attached at
http://www.xilinx.com/support.
Release 12.4 - Map M.81d (lin64)


/michael
Click to expand...
Is "CentOS 64bit" a supported operating system for ISE 12.4?

You could try opening a WebCase for it at http://www.xilinx.com/support,
unless you are a student, in which case I suspect your supervisor has to d
it.


---------------------------------------
Posted through http://www.FPGARelated.com
 
On Jan 26, 4:56 am, Michael <michael_laaja...@yahoo.com> wrote:
Hi,

I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS 64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?

INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
    does not match number of bytes requested.  Corrupted file?
INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
    does not match number of bytes requested.  Corrupted file?
FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX
for PM
    base   Process will terminate. For technical support on this issue,
please
    open a WebCase with this project attached athttp://www.xilinx.com/support.
Release 12.4 - Map M.81d (lin64)

/michael
Click to expand...
Did you translate the project or start a new one fresh? I have seen
poor results translating ("upgrading") projects.

The error sounds like a "unix EOL vs/ DOS EOL" type of problem. Was
the 9.2 project created in Windows?

CentOS is so similar to Fedora that I would not be looking at OS
issues; odds are it is an ISE issue.

Do you have access to 9.2 on Linux? That might be an interesting
test. (Or 12.4 on Windows...)

Another question is "Why are you changing ISE versions?" I am seeing
less than stellar results with version 12 (or version 11 for that
matter).

$.02,
G.
 
Hi,

On 01/26/11 07:30 PM, ghelbig wrote:
On Jan 26, 4:56 am, Michael<michael_laaja...@yahoo.com> wrote:
Hi,

I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS 64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?

INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX
for PM
base Process will terminate. For technical support on this issue,
please
open a WebCase with this project attached athttp://www.xilinx.com/support.
Release 12.4 - Map M.81d (lin64)

/michael

Did you translate the project or start a new one fresh? I have seen
poor results translating ("upgrading") projects.
Its an old projekt no ISE using a Makesystem so no GUI.
Click to expand...

The error sounds like a "unix EOL vs/ DOS EOL" type of problem. Was
the 9.2 project created in Windows?
No on Solaris
Click to expand...

CentOS is so similar to Fedora that I would not be looking at OS
issues; odds are it is an ISE issue.

Correct.
Click to expand...

Do you have access to 9.2 on Linux? That might be an interesting
test. (Or 12.4 on Windows...)

Yes, runs fine.
Click to expand...

Another question is "Why are you changing ISE versions?" I am seeing
less than stellar results with version 12 (or version 11 for that
matter).

$.02,
G.
I agree with you to not change ISE version thats why we are still on 9.2
Click to expand...
and Solaris which is rocksolid, cant say they same for the GUIs on
Linux, they really suck.

But the reason is a test to see if we can gain something from
performance point of view(speed)

/michael
 
Hi,

On 01/26/11 02:53 PM, RCIngham wrote:
Hi,

I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS 64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?



INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX
for PM
base Process will terminate. For technical support on this issue,
please
open a WebCase with this project attached at
http://www.xilinx.com/support.
Release 12.4 - Map M.81d (lin64)


/michael


Is "CentOS 64bit" a supported operating system for ISE 12.4?
No, but RH is and its as close as it gets.
Click to expand...

You could try opening a WebCase for it at http://www.xilinx.com/support,
unless you are a student, in which case I suspect your supervisor has to do
it.


---------------------------------------
Posted through http://www.FPGARelated.com
Yes thats done, and Xilinx has responded very promptly :)
Click to expand...

/michael
 
Whenever I see internal tool errors like that I first suspect a quota/full
disk type problem.

--steve


"Michael" <michael_laajanen@yahoo.com> wrote in message
news:8qajvpF1l4U1@mid.individual.net...
Hi,

I am trying a design that is from ISE 9.2 on the latest 12.4 using CentOS
64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?



INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
Click to expand...
 
Hi,

On 01/27/11 07:47 PM, Steve Ravet wrote:
Whenever I see internal tool errors like that I first suspect a quota/full
disk type problem.

--steve

Dont top post on Usenet. http://www.caliburn.nl/topposting.html
Click to expand...

Then you should have a better control of your server I think and keep
track of usage per day or so.

There are tools that can monitor diskuage and alert when you are
reaching a critical level.


"Michael"<michael_laajanen@yahoo.com> wrote in message
news:8qajvpF1l4U1@mid.individual.net...
Hi,

I am trying a design that is from ISE 9.2 on the latest 12.4 using CentOS
64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?



INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
Click to expand...
/michael
 
Thanks for the suggestions Michael.

The point is that when ISE runs out of disk space it does not, in my
experience, say "no space available on device" or something like that. It
usually says something like "internal error".

--steve

"Michael" <michael_laajanen@yahoo.com> wrote in message
news:8qe1ohF3lmU1@mid.individual.net...
Dont top post on Usenet. http://www.caliburn.nl/topposting.html

Then you should have a better control of your server I think and keep
track of usage per day or so.

There are tools that can monitor diskuage and alert when you are reaching
a critical level.
Click to expand...
 
Hi,

On 01/27/11 09:09 PM, Michael wrote:
Hi,

On 01/27/11 07:47 PM, Steve Ravet wrote:
Whenever I see internal tool errors like that I first suspect a
quota/full
disk type problem.

--steve

Dont top post on Usenet. http://www.caliburn.nl/topposting.html

Then you should have a better control of your server I think and keep
track of usage per day or so.

There are tools that can monitor diskuage and alert when you are
reaching a critical level.



"Michael"<michael_laajanen@yahoo.com> wrote in message
news:8qajvpF1l4U1@mid.individual.net...
Hi,

I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS
64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?



INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?



/michael
Just an update. CentOS is not supported and does not seam to run on IS
Click to expand...
12.4 sadly. 9.2 does!

/michael
 
Michael <michael_laajanen@yahoo.com> writes:

I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS
64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?



INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?



/michael

Just an update. CentOS is not supported and does not seam to run on IS
12.4 sadly. 9.2 does!
Click to expand...

we have on our Servers CentOS (5.5), and ISE 12.4 works on it.
Never saw your error, maybe its something in your design, that the new
version no longer supports?

http://www.xilinx.com/support/answers/32912.htm indicates that maybe
some permissions are wrong (the link leads to a VISTA Problem, but
it got exact the same error message).

Florian
 
Hi,

On 03/08/11 01:28 PM, Florian Stock wrote:
Michael<michael_laajanen@yahoo.com> writes:

I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS
64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.

Anyone seen the same and know a solution?



INTERNAL_ERROR:portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?



/michael

Just an update. CentOS is not supported and does not seam to run on IS
12.4 sadly. 9.2 does!


we have on our Servers CentOS (5.5), and ISE 12.4 works on it.
Never saw your error, maybe its something in your design, that the new
version no longer supports?

http://www.xilinx.com/support/answers/32912.htm indicates that maybe
some permissions are wrong (the link leads to a VISTA Problem, but
it got exact the same error message).

Florian
Is that 32 or 64 bit versions?
Click to expand...

Also, do you know what libraries is installed over the "vanilla" CentOS 5.5?

And how to you setup the environment, is that using Xilins inits that is
to be sourced?

Much thanks for any input.

/michael
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top