Is Xilinx Parallel Cable III OK For Memec V2Pro / Xilinx EDK

[Dave]

I've purchased the Memec V2Pro board and Xilinx EDK. Can I use my
Parallel Cable III, or is the IV required? Thanks.

-Dave

 

[Matt]

you should be good to go

"Dave" <apple2ebeige@yahoo.com> wrote in message
news:d4aa8e8a.0404121553.780bebf0@posting.google.com...

I've purchased the Memec V2Pro board and Xilinx EDK. Can I use my
Parallel Cable III, or is the IV required? Thanks.

-Dave

 

[Steve Merritt]

Just to add to Matts reply... the parallel III cable should work fine for
the VIIPro boards however it wasn't really intended for 2.5v JTAG - see here
:

http://support.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=1&getPagePath=8096
The only other point to note is that the parallel IV cable is significantly
faster than the parallel III

Regards,


--
Steve Merritt BEng (Hons) CEng MIEE
XILINX Gold Certified Field Applications Engineer
Insight MEMEC

Click link below for more information on :
XILINX Free Training
<http://www.xilinx.com/support/training/europe-home-page.htm>
XILINX Design Services
<http://www.xilinx.com/xlnx/xil_prodcat_landingpage.jsp?title=Design+Service
s>
10 Gbps Serial IO on FPGA <http://www.xilinx.com/systemio/10gig/index.htm>

Or Tel - 08707 356532 for more information

"Matt" <bielstein2002@comcast.net> wrote in message
news:zWKec.25456$wP1.64895@attbi_s54...

you should be good to go

"Dave" <apple2ebeige@yahoo.com> wrote in message
news:d4aa8e8a.0404121553.780bebf0@posting.google.com...
I've purchased the Memec V2Pro board and Xilinx EDK. Can I use my
Parallel Cable III, or is the IV required? Thanks.

-Dave

 

[Remis Norvilis]

And then Dave wrote:

I've purchased the Memec V2Pro board and Xilinx EDK. Can I use my
Parallel Cable III, or is the IV required? Thanks.

-Dave

I had this problem, and contacted Memec tech support. The fix they
suggested, is dissconnecting Vcc (red wire) from JTAG and connect directly
into 3.3V on JP29. This works for me.

Remis

--

************************************************
To reply, remove >.spam< and >.fake<