InfraRed

[Wong]

Hi folks,
What is IR Blaster ? What is the different between IR Blaster with normal one ?
I will be appreciated if you can point me a tutorial/website. Thanks in advance.

 

[Art]

? I believe the device you refer to is an item that will extend the range of
your IR remote device via RF link. These are used for controlling a tele,
vcr, etc in another room. The transmitter is placed in the same room you are
in with the remote control. The receiver is them placed in the room with the
equipment you are wanting to control, with it's IR being directed to that
specific device. Many manufacturers make these devices and they tend to work
rather well, within design limitations.
"Wong" <tatto0_2000@yahoo.com> wrote in message
news:509bfe22.0405242244.275a7477@posting.google.com...

Hi folks,
What is IR Blaster ? What is the different between IR Blaster with normal
one ?
I will be appreciated if you can point me a tutorial/website. Thanks in
advance.

 

[Marlboro]

for beginer, try this site :
www.ustr.net/infrared/nec.htm

cheer,

 

[Marlboro]

sorry the link in previous post suppose to be
http://www.ustr.net/infrared/nec.shtml

 

[Wong]

"Art" <stubby@comcast.net> wrote in message news:<9ICdndsVzbKTgy7dRVn-tw@comcast.com>...

? I believe the device you refer to is an item that will extend the range of
your IR remote device via RF link. These are used for controlling a tele,
vcr, etc in another room. The transmitter is placed in the same room you are
in with the remote control. The receiver is them placed in the room with the
equipment you are wanting to control, with it's IR being directed to that
specific device. Many manufacturers make these devices and they tend to work
rather well, within design limitations.

I am talking about that. This IR Blaster is used to trigger on an
off-power circuit, should be something like this. But I just don't
know how. However, thanks for your reply.

"Wong" <tatto0_2000@yahoo.com> wrote in message
news:509bfe22.0405242244.275a7477@posting.google.com...
Hi folks,
What is IR Blaster ? What is the different between IR Blaster with normal
one ?
I will be appreciated if you can point me a tutorial/website. Thanks in
advance.

 

[Glenn Gundlach]

ccon67@netscape.net (Marlboro) wrote in message news:<e3fd5378.0405250946.6f161481@posting.google.com>...

sorry the link in previous post suppose to be
http://www.ustr.net/infrared/nec.shtml

I've chosen the 'brute force' approach to the Samsung remote. I
borrowed a Tek DPO from work, aimed the remote at a commercial IR
demod, grabbed the waveforms and printed each buttons sheet. Then come
up with a table of the values and transfer into 68HC908 assembler.
Should be running in about a week.
GG