In search of a cheap usb A fly lead

M

mikegw

Guest
Hello all.

I am in search of lead with an USB A plug on one end and bare wires on the
other length not very important. I need about 10 of these. I can get a usb
A to usb A cable for about $5 and think that just cutting it in half will be
fine. Has anyone got other sources/ideas?

Cheers

Mike
 
On Wed, 1 Jun 2005 15:06:48 +1000, "mikegw"
<mikegw20@hotmail.spammers.must.die.com> put finger to keyboard and
composed:

I am in search of lead with an USB A plug on one end and bare wires on the
other length not very important. I need about 10 of these. I can get a usb
A to usb A cable for about $5 and think that just cutting it in half will be
fine. Has anyone got other sources/ideas?
WES Components have A-A leads starting from $2.90 for 1m.


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
 
"mikegw" <mikegw20@hotmail.spammers.must.die.com> wrote in message
news:d7jfsb$2up$1@tomahawk.unsw.edu.au...
Hello all.

I am in search of lead with an USB A plug on one end and bare wires on the
other length not very important. I need about 10 of these. I can get a
usb
A to usb A cable for about $5 and think that just cutting it in half will
be
fine.
You are unlikely to find a cheaper solution.

MrT.
 
"mikegw" <mikegw20@hotmail.spammers.must.die.com> while reading
the NewsGroups, found courage and express out opinion in
news:d7jfsb$2up$1@tomahawk.unsw.edu.au:

Hello all.

I am in search of lead with an USB A plug on one end and bare
wires on the other length not very important. I need about 10
of these. I can get a usb A to usb A cable for about $5 and
think that just cutting it in half will be fine. Has anyone got
other sources/ideas?

Cheers

Mike
Just buy the plugs from Jaycar.

Par.
 
"Parmin" <rajabetawi@hotmailspam.com> wrote in message
news:Xns96695E139EFA9FArt@203.26.24.228...
I am in search of lead with an USB A plug on one end and bare
wires on the other length not very important. I need about 10
of these. I can get a usb A to usb A cable for about $5 and
think that just cutting it in half will be fine. Has anyone got
other sources/ideas?

Just buy the plugs from Jaycar.
Will definitely cost more than $2.50 with 1 metre of suitable cable. Not to
mention time to terminate.

Buy a 2 Metre USB A-A cable and cut in half if you want 1 Metre leads.
(obviously a 5 metre cable will give you 2 * 2.5 metre leads for a few more
$)

MrT.
 
Just buy the plugs from Jaycar.

Will definitely cost more than $2.50 with 1 metre of suitable cable. Not
to
mention time to terminate.

Buy a 2 Metre USB A-A cable and cut in half if you want 1 Metre leads.
(obviously a 5 metre cable will give you 2 * 2.5 metre leads for a few
more
$)

You just cannot beat mass production these days. Besides my local jaycar
must go through a pack of AA's each day running all their farting toys. It
makes it hard to think why you went into the shop. JR Turk seems more my
speed for tools and wire these days.

Cheers

Mike
 

Welcome to EDABoard.com

Sponsor

Back
Top