Image export from Quartus?

[Andrew Holme]

I'm designing a CPLD using the block diagram / schematic editor in
Quartus II Version 4.1 Web Edition.

Does anyone know a way to export the block diagram as an image? As
far as I can see, the only way is to take a screen shots or else print
to file.

 

[Subroto Datta]

Hi Andrew,

Print to file is your best bet. Exporting the block diagram as an image
is not available at the present time. I will pass this request on to the
right folks.

- Subroto Datta
Altera Corp.

"Andrew Holme" <ajholme@hotmail.com> wrote in message
news:966757eb.0407241646.48d695f6@posting.google.com...

I'm designing a CPLD using the block diagram / schematic editor in
Quartus II Version 4.1 Web Edition.

Does anyone know a way to export the block diagram as an image? As
far as I can see, the only way is to take a screen shots or else print
to file.

 

[Leon Heller]

"Subroto Datta" <sdatta@altera.com> wrote in message
newskHMc.491$uC7.328@newssvr19.news.prodigy.com...

Hi Andrew,

Print to file is your best bet. Exporting the block diagram as an image
is not available at the present time. I will pass this request on to the
right folks.

Windows Metafile would be useful. It can them be pasted into a document and
will scale nicely. The Pulsonix PCB software I use has this facility.

Leon

 

[George]

ajholme@hotmail.com (Andrew Holme) wrote in message news:<966757eb.0407241646.48d695f6@posting.google.com>...

I'm designing a CPLD using the block diagram / schematic editor in
Quartus II Version 4.1 Web Edition.

Does anyone know a way to export the block diagram as an image? As
far as I can see, the only way is to take a screen shots or else print
to file.

Two choices.

1. Get the screen image sized and shaped to suit your needs. Do a
print screen ten open wordpad and do a paste. You've got the screen
shot as an image file.

2. Get a PDF printer driver. Lots of shareware you can try before you
buy I use WIN2PDF. THe print to the pdf driver and you've got a pdf
file that you can view and print.

Good Luck
George
www.embedded-designer.com