Iiyama VM Pro 510

[Chris]

I have a 3 year old model which has just developed an annoying fault. If
it's left on stanby overnight it switches off and won't come on unless I
disconnect the mains lead for a couple of minutes. Any idea where to look,
is it a known fault?
Thanks
Chris

 

[Jerry G.]

Most likely some components in the power supply are failing. The defective
part(s) may be a bit thermo sensitive. When unplugging the monitor, the
parts cool a little, and when up to temperature, they are defective. In the
supply there is a start-up or kick-start circuit. The configuration of
these circuits is different from one model the other, depending on the
philosophy of the particular model design.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Chris" <junkpile@tiscali.co.uk> wrote in message
news:bq3akn$nqj$1@news7.svr.pol.co.uk...
I have a 3 year old model which has just developed an annoying fault. If
it's left on stanby overnight it switches off and won't come on unless I
disconnect the mains lead for a couple of minutes. Any idea where to look,
is it a known fault?
Thanks
Chris

 

[Chris]

"Jerry G." <jerryg50@hotmail.com> wrote in message
news:bq3hm5$hg8$1@news.eusc.inter.net...

Most likely some components in the power supply are failing. The
defective
part(s) may be a bit thermo sensitive. When unplugging the monitor, the
parts cool a little, and when up to temperature, they are defective. In
the
supply there is a start-up or kick-start circuit. The configuration of
these circuits is different from one model the other, depending on the
philosophy of the particular model design.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Chris" <junkpile@tiscali.co.uk> wrote in message
news:bq3akn$nqj$1@news7.svr.pol.co.uk...
I have a 3 year old model which has just developed an annoying fault. If
it's left on stanby overnight it switches off and won't come on unless I
disconnect the mains lead for a couple of minutes. Any idea where to look,
is it a known fault?
Thanks
Chris

Have investigated further, sometimes it will stay on standby all night but
shut down completely when I boot the PC. I then have to unplug it for a
while and then plug it in making sure it is switched on first.
Chris