F
Frank
Guest
Hi everybody,
please bear with me if this is a FAQ and point me
gently into the
right direction...
Could anyone out there help me with finding out
the specs for
the smd (surface mount) fuse shown in the
following picture?
http://www.pda-soft.de/2x00smdfuse.jpg
The fuse is labeled
21 and (length x width x height) about 3 x 1.5 x
1.2 millimeter
(0.12 x 0.06 x 0.05 inches).
Considering the dimensions of the "wire" inside
this fuse, I'd expect
it to be in the 1 Ampere range.
Thanks in advance, everybody.
Frank
-- Newton hardware and software at
http://www.pda-soft.de
please bear with me if this is a FAQ and point me
gently into the
right direction...
Could anyone out there help me with finding out
the specs for
the smd (surface mount) fuse shown in the
following picture?
http://www.pda-soft.de/2x00smdfuse.jpg
The fuse is labeled
21 and (length x width x height) about 3 x 1.5 x
1.2 millimeter
(0.12 x 0.06 x 0.05 inches).
Considering the dimensions of the "wire" inside
this fuse, I'd expect
it to be in the 1 Ampere range.
Thanks in advance, everybody.
Frank
-- Newton hardware and software at
http://www.pda-soft.de