Ic6.1.x holds licenses (even in real only mode)

B

bu-bu

Guest
Hello guys,

i did not post messages for a while now ^^v

I have a question, i noticed that Ic6.1.3 or Ic6.1.4 licenses
problems:
- I open a schematic in edit mode -> license is checked
-i save and put the schematic in read only -> the schematic license is
not released.

I have to "close data" to release the license. and this annoying in
many cases :(
Versions we are using:
IC6.14.500.1
IC6.13.500.10

How can i fix that ?

Thanks a lot for your help :)

bubu
 
On Apr 27, 9:31 pm, bu-bu <bedo...@gmail.com> wrote:
Hello guys,

i did not post messages for a while now ^^v

I have a question, i noticed that Ic6.1.3 or Ic6.1.4 licenses
problems:
- I open a schematic in edit mode -> license is checked
-i save and put the schematic in read only -> the schematic license is
not released.

I have to "close data" to release the license. and this annoying in
many cases :(
Versions we are using:
IC6.14.500.1
IC6.13.500.10

How can i fix that ?

Thanks a lot for your help :)

bubu
Click to expand...

I imagine you have opened your schematic at the XL level.
Even in read mode in XL you can edit constraints associated with the
schematic which does not require the schematic to be open for edit.
The license is still active for this purpose.
To release the license without closing your data just switch to the L
level.
 
On 4月28日, 午前8:23, Dennis <higg...@cadence.com> wrote:
On Apr 27, 9:31 pm, bu-bu <bedo...@gmail.com> wrote:



Hello guys,

i did not post messages for a while now ^^v

I have a question, i noticed that Ic6.1.3 or Ic6.1.4 licenses
problems:
- I open a schematic in edit mode -> license is checked
-i save and put the schematic in read only -> the schematic license is
not released.

I have to "close data" to release the license. and this annoying in
many cases :(
Versions we are using:
IC6.14.500.1
IC6.13.500.10

How can i fix that ?

Thanks a lot for your help :)

bubu

I imagine you have opened your schematic at the XL level.
Even in read mode in XL you can edit constraints associated with the
schematic which does not require the schematic to be open for edit.
The license is still active for this purpose.
To release the license without closing your data just switch to the L
level.
Click to expand...
Hello Dennis,

Thanks a lot for your reply, i did not know that !!

Best,

bubu
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top