I'am new to electronics and have been thinking about looking

D

Don Young

Guest
I was going to buy one of those cheap digital Oscilloscope kits off of eBay but was told to check with this group and ask if anyone has a old working used Analog Oscilloscope that they would donate to me so I could test the circuits I have been building . I really like tinkering and have learned a lot in the past 2 years and a Oscilloscope would be my next piece of test equipment , but a new one is out of range for me but a used working old unit would be great for learning on . If anyone could help me I would greatly appreciate it . I Am disabled and working with electronics has opened a door for me that otherwise would leave me bored and doing nothing . I do not care if it is scratched or dented up as long as it is working , if anyone could help me contact me by phone at 1-772-200-0712 (I do not open e-mails for fear of being hacked ) Thank you , Don Young ( looking forward to a reply and some help )
 
In article <d2f86a4c-134a-4190-842d-ff71fe58f1b6@googlegroups.com>,
irdon13@gmail.com says...
I was going to buy one of those cheap digital Oscilloscope kits off of eBay but was told to check with this group and ask if anyone has a old working used Analog Oscilloscope that they would donate to me so I could test the circuits I have been building . I really like tinkering and have learned a lot in the past 2 years and a Oscilloscope would be my next piece of test equipment , but a new one is out of
range for me but a used working old unit would be great for learning on . If anyone could help me I would greatly appreciate it . I Am disabled and working with electronics has opened a door for me that otherwise would leave me bored and doing nothing . I do not care if it is scratched or dented up as long as it is working , if anyone could help me contact me by phone at 1-772-200-0712 (I do not open e-mails for
fear of being hacked ) Thank you , Don Young ( looking forward to a reply and some help )

If you were close I would probably give you an old one, but the shipping
for them is more than the scope is worth.

Go to the arrl.org web site and look for the hamfests near you. That is
a big flea market for electronic gear. You might find a scope in your
price range.

There are some units that connect by USB to a computer for about $ 60
that you may want to look at.
 
On Sat, 18 Feb 2017 15:44:08 -0500, Ralph Mowery
<rmowery28146@earthlink.net> wrote:

There are some units that connect by USB to a computer for about $ 60
that you may want to look at.

Geez, I never knew they made such a thing.

Could you post a URL or two for them. I am not sure how to google for
this sort of thing.
 
On 2/19/2017 4:59 PM, oldschool@tubes.com wrote:
Geez, I never knew they made such a thing.

Could you post a URL or two for them.

<http://www.ebay.com/itm/330731251939>

--
Jeff-1.0
wa6fwi
http://www.foxsmercantile.com
 
In article <no8kacdfgvm17a2jk7q08ho928h5o051q3@4ax.com>,
oldschool@tubes.com says...
On Sat, 18 Feb 2017 15:44:08 -0500, Ralph Mowery
rmowery28146@earthlink.net> wrote:

There are some units that connect by USB to a computer for about $ 60
that you may want to look at.

Geez, I never knew they made such a thing.

Could you post a URL or two for them. I am not sure how to google for
this sort of thing.

Get on Ebay and look around. YOu can often get them direct from China.
I have ordered many things from there and it usually takes about 2 to 3
weeks to get here.

Hantek is a good brand. I have one of the 200 MHz scopes I bought from
a US suplier for $ 299 including shipping.That was a new full scope
inckuding the probes.


http://www.ebay.com/itm/Hantek-6022BE-PC-Based-USB-Digital-Storag-
Oscilloscope-48MSa-s-20MHz-2-Channels/272515225036?
_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%
26ao%3D1%26asc%3D41376%26meid%3D1df41ef25c634e13aecc63dfc5fc32a9%26pid%
3D100033%26rk%3D3%26rkt%3D8%26sd%3D330731251939

Here is a US suplier that I have ordered other things from. There is a
short video on a similar one.

https://www.circuitspecialists.com/usb-oscilloscope-hantek6082be.html
 
On Sun, 19 Feb 2017 20:01:43 -0500, Ralph Mowery
<rmowery28146@earthlink.net> wrote:

http://www.ebay.com/itm/Hantek-6022BE-PC-Based-USB-Digital-Storag-
Oscilloscope-48MSa-s-20MHz-2-Channels/272515225036?
_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%
26ao%3D1%26asc%3D41376%26meid%3D1df41ef25c634e13aecc63dfc5fc32a9%26pid%
3D100033%26rk%3D3%26rkt%3D8%26sd%3D330731251939

This link should work better (with the tracking info removed):
<http://www.ebay.com/itm/272515225036>

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
Il giorno lunedĂŹ 20 febbraio 2017 00:00:27 UTC+1, olds...@tubes.com ha scritto:
On Sat, 18 Feb 2017 15:44:08 -0500, Ralph Mowery
rmowery28146@earthlink.net> wrote:

There are some units that connect by USB to a computer for about $ 60
that you may want to look at.

Geez, I never knew they made such a thing.

Could you post a URL or two for them. I am not sure how to google for
this sort of thing.

picoscope are ok, but not cheap as ebay chinese crap.

Bye Jack
 
In article <no8kacdfgvm17a2jk7q08ho928h5o051q3@4ax.com>,
oldschool@tubes.com says...
On Sat, 18 Feb 2017 15:44:08 -0500, Ralph Mowery
rmowery28146@earthlink.net> wrote:

There are some units that connect by USB to a computer for about $ 60
that you may want to look at.

Geez, I never knew they made such a thing.

Could you post a URL or two for them. I am not sure how to google for
this sort of thing.

http://cpc.farnell.com/webapp/wcs/stores/servlet/Search?pageSize=25
&st=pc+scope&catalogId=15002&categoryId=700000027512&langId=69&storeId=
10180
 
"Ralph Mowery" <rmowery28146@earthlink.net> wrote in message
news:MPG.33127c203845a46d989854@news.east.earthlink.net...
In article <d2f86a4c-134a-4190-842d-ff71fe58f1b6@googlegroups.com>,
irdon13@gmail.com says...

I was going to buy one of those cheap digital Oscilloscope kits off of
eBay but was told to check with this group and ask if anyone has a old
working used Analog Oscilloscope that they would donate to me so I could
test the circuits I have been building . I really like tinkering and have
learned a lot in the past 2 years and a Oscilloscope would be my next
piece of test equipment , but a new one is out of
range for me but a used working old unit would be great for learning on .
If anyone could help me I would greatly appreciate it . I Am disabled and
working with electronics has opened a door for me that otherwise would
leave me bored and doing nothing . I do not care if it is scratched or
dented up as long as it is working , if anyone could help me contact me by
phone at 1-772-200-0712 (I do not open e-mails for
fear of being hacked ) Thank you , Don Young ( looking forward to a reply
and some help )

If you were close I would probably give you an old one, but the shipping
for them is more than the scope is worth.

Go to the arrl.org web site and look for the hamfests near you. That is
a big flea market for electronic gear. You might find a scope in your
price range.

There are some units that connect by USB to a computer for about $ 60
that you may want to look at.

I'm a little wary of DSOs, they're sampling so you can get caught out on non
repetitive waveforms.. Apparently you have to spend big money to make this
problem go away.

As long as it lasts - novices could probably learn a lot by getting started
with an old CRO.
 
In article <d2f86a4c-134a-4190-842d-ff71fe58f1b6@googlegroups.com>,
ird...@gmail.com says...
I was going to buy one of those cheap digital Oscilloscope kits off of eBay but was told to check with this group and ask if anyone has a old working used Analog Oscilloscope that they would donate to me so I could test the circuits I have been building . I really like tinkering and have learned a lot in the past 2 years and a Oscilloscope would be my next piece of test equipment.

Yes, having a trainer kit (trainer board), an oscilloscope and sitting in an elecronics or electrical apprenticeship class is a great way to start out..
 

Welcome to EDABoard.com

Sponsor

Back
Top