I have a Robbins & Meyers "Dental Lathe Motor". Where do the

[John G.]

Info from faceplate. Dental Lathe Motor
Frame 18m
Volts 115 Cyc 60
RPM 1750/3450 Amps 2.7

--
+---------------[ SERVER SIGNATURE ]-------+
| posted via http://www.electrondepot.com |
| Web, RSS and Social Media Interface to |
| sci.electronics.repair and other groups |
+------------------------------------------+

 

[passerby]

responding to
http://www.electrondepot.com/repair/i-have-a-robbins-meyers-dental-lathe-motor-where-do-the-147901-.htm
, passerby wrote:

John G. wrote:

Info from faceplate. Dental Lathe Motor
Frame 18m
Volts 115 Cyc 60
RPM 1750/3450 Amps 2.7

As in this from all the way back in 1914:
http://books.google.com/books?id=VX02AQAAMAAJ&dq=Robbins%20%26%20Myers%20%22Dental%20Lathe%20Motor%22&pg=PA33#v=onepage&q=Robbins%20&%20Myers%20%22Dental%20Lathe%20Motor%22&f=false

Wow, that's an antique! Anyway, does it still have the base? The power cord
attaches to connectors inside the base, which ones hard to tell without a
photo. Can you post one?

--

 

[Rheilly Phoull]

On 20/08/13 12:18, John G. wrote:

Info from faceplate. Dental Lathe Motor
Frame 18m
Volts 115 Cyc 60
RPM 1750/3450 Amps 2.7

Onto to the terminals of course!
Perhaps just a smidge more info would get more assistance

 

[John G]

responding to
http://www.electrondepot.com/repair/i-have-a-robbins-meyers-dental-lathe-motor-where-do-the-147901-.htm
, John G wrote:

passerby wrote:


http://www.electrondepot.com/repair/i-have-a-robbins-meyers-dental-lathe-motor-where-do-the-147901-.htm
,:
John G. wrote:

Info from faceplate. Dental Lathe Motor
Frame 18m
Volts 115 Cyc 60
RPM 1750/3450 Amps 2.7



ones hard to tell without
a photo.
Can you post one?

I will post a photo this weekend. I was hoping to get some kind of wiring
diagram.