HP 4261A LCR meter mains power supply setting

A

Anders Johansson

Guest
I just bought a 115VAC HP4261A without a manual.
I need to set the mains power entry to 230VAC.
Does anyone have a manual?
I need a copy of the page that describes how to do this.

Thanks,
Anders J
 
Anders Johansson wrote:

I just bought a 115VAC HP4261A without a manual.
I need to set the mains power entry to 230VAC.
Does anyone have a manual?
I need a copy of the page that describes how to do this.

Thanks,
Anders J
Not knowing the machine by heart, my first guess is that their will be a
Click to expand...
little pull out card that sits under the fuse holder next to the IEC
lead. 110V will be visible. pull this circuit card(board) out and swap
it around so 240V is visible. The other scheme HP used was a little
plastic barrel , which sits behind a cover. pull it out(the cover)
remove the barrell, rotate until 240V is visible, now replace the barrel
and the cover. your in business.

Andrew
 
The pull out card solved my problem.
Many thanks Andrew.

Anders

"Andrew Tweddle" <sarason_not_me@alphalink.com.au> skrev i meddelandet
news:421c3a23$1@news.alphalink.com.au...
Anders Johansson wrote:

I just bought a 115VAC HP4261A without a manual.
I need to set the mains power entry to 230VAC.
Does anyone have a manual?
I need a copy of the page that describes how to do this.

Thanks,
Anders J
Not knowing the machine by heart, my first guess is that their will be a
little pull out card that sits under the fuse holder next to the IEC
lead. 110V will be visible. pull this circuit card(board) out and swap
it around so 240V is visible. The other scheme HP used was a little
plastic barrel , which sits behind a cover. pull it out(the cover)
remove the barrell, rotate until 240V is visible, now replace the barrel
and the cover. your in business.

Andrew
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top